Quick Question!

Have you ever purchased from PartSelect.com before?

11744702-1-S-Whirlpool-WP7733P410-60-Burner Knob - Stainless
11744702-1-S-Whirlpool-WP7733P410-60-Burner Knob - Stainless 11744702-2-S-Whirlpool-WP7733P410-60-Burner Knob - Stainless 11744702-3-S-Whirlpool-WP7733P410-60-Burner Knob - Stainless http://www.partselect.com/Schematics/Maytag/56127.gif

Burner Knob - Stainless

PartSelect Number PS11744702

Sold individually. This knob accepts a D-shaped shaft. This is a plastic colored stainless knob.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Gas igniter glows, but will not light.
  • Touchpad does not respond.

Compare At

$20.54

You Save

$3.42

Your Price

$17.12
Order within the next 5 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 24 reviews What's this?
1-15 of 24
 

467 of 482 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Michael from South Lake Tahoe, CA

Burner knobs melted, burned out electrode

R&R OLD knobs easy .R&R BURNER W/ ELECTRODE, UNSCREW LIFT OFF, UNPLUG SEECTRODE Reverse procedure easy

Help other customers find the most helpful instructions.

Were these instructions helpful?   

445 of 526 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Susan from Grand Junction, CO

Broken control knob for cooktop

found the picture of the piece I needed on your website, ordered it and have it almost immediately. very pleased with the service.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

203 of 356 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Janet from Chula Vista, CA

Continually having to replace the knobs because they are made of cheap plastic and split down the side for whatever reason I don't know. I do not know what I am doing to cause them to split down a side. Why can't they be made of a heavier metal?

took old one off with fingers
replace with new one with a new knob again

Help other customers find the most helpful instructions.

Were these instructions helpful?   

147 of 213 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: mara from Lake Shore, MN

Burner knobs on cooktop melted

I have been trying to find replacement knobs for months. I was having difficulty locating the model # on my actual cooktop and was told time and time again without it I would be out of luck. The # on the knob apparently meant nothing, go figure. This website actually had a picture!!!!! Eureka!!! I located my knobs! Great price, simple to put on, this website made my day. Thanks!!!!! :)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

161 of 307 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Dennis from Iredell, TX

Simple to change, but you do need a torx bit screwdriver.

Remove screws holding burner down, invert and remove screw in igniter. Reverse to reinstall.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

151 of 295 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Eugene from Chicago, IL

Cooktop burner knob contacted griddle, partially melted.

Pulled off old, repositioned new burner knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

144 of 285 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kit from Temple, TX

Burner knob was broken

I removed the old knob and inserted the new one, which matched exactly. Cooktop is now like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

146 of 349 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: FRED from CLARKSBURG, NJ

Retainer spring inside knob was lost from cleaning.

Just pulled off the old knob and pushed on the new knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: bill from spokane valley, WA

Electrode clicked but failed to light burner

I first tried to remove the torx screws only to have them break off..soooo as with most home repairs it grew into a bigger task. 1) unhooked the gas line and unplugged the unit 2) place the unit upside down on workbench 3) used a socket set to remove the hex screws that held the top on 4)removed all the other burners and disconnected electrical wire connected to the igniters. 5) Removed the top 6) uses pliers to remove the screw parts left in the burner base (wd-40 and lock wrench)..Replaced the old gaskets 7) put the top back on and screwed the top back on (make sure you pull the igniter wires through the top before securing it) 8) Reseat and screw in the burners using a torx bit

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Carol from Riverside, CA

Shafts on burner knobs had split.

I thought I had ordered metal knobs but it appears that I got plastic ones. I’m thinking they’ll be fine, the others had just split the shaft that sits on the control stem, but I’m hoping this won’t happen again. I do have a repair question regarding one of the sealed burners on my Jenn-Air. The igniter switch sounds like it’s working but the burner won’t light without putting a match to it. Do you have any ideas of what could be wrong?
Thanks for your help,
Carol Lance

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Elena from Chandler, AZ

Broken burner knob

just replaced with a new one. very easy

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Greg from Syracuse, UT

Burner knob melted

Pulled the old one off, pushed the new one on. Super easy. Simple ordering, quick processing and delivery. Way to go PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Melvin from San Marcos, CA

Old burner knobs had cracks

Removed the old burner knobs by hand, and replaced them with four new knobs.....

Real Easy!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Sid from Saint Francisville, LA

Plastic burner knobs cracked

Pulled off the old and pushed on the new. Took less than a minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Burner Knob - Stainless
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michael from Encinitas, CA

Melted knobs, replaced

Ordered from Sears.com....under impression that we would get 4 knobs for about 20.00, to our surprise we got only one knob for 20 dollars plus shipping.
Your website was wonderful... have three knobs for the same price as one from Sears.
Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 24