Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/35303.gif
See part 2 in the diagram
http://www.partselect.com/Schematics/Maytag/35303.gif

Electronic Control

PartSelect Number PS11744636

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$145.76

You Save

$24.29

Your Price

$121.47
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

1 of 1 people found this instruction helpful

Parts Used:
  • Electronic Control
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Aggie from Fulton, MO

Timer quit working and starting making arcing sounds

This repair was very simple.
First I UNPLUGGED the stove.
Then I removed the 6 screws on the top portion of the back panel.
Then I removed the knobs from the front of the stove.
Then I removed the 2 screws holding on the front glass covering the clock/timer.
I then drew a diagram of the wire colors and the corresponding numbers on the old timer block. Then I removed the 6 wires from the old timer.
I then pushed in on the 4 black holders that secure the clock/timer to the chassis. The clock/timer pushes out from the rear to the front.
Going back together, just push the new clock/timer into the hole until the holders snap in place.
I then found the corresponding numbers on the new clock/timer block and put on the respective wire colors.
I then put the front glass back on, then the knobs, then the back panel.
Plug it in and you are golden. It couldn't be easier. It took all of about 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Electronic Control
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Charles from Deer Park, TX

The timer died

Removed the old timer and installed the new one without any problems.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2