Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11744634
This single outlet water valve is intended for use with some commercial ice machines, and not refrigerator icemakers. It comes with a mounting bracket, two screws, and a washer.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This is a stand alone ice maker that uses a standard water valve. When the valve fails (usually stuck open) the water never chills enough to freeze because water is constantly flowing into the hopper. The valve is in the very front. Remove the front panel. Turn of the water supply and disconnect the valve. Replace the valve and turn on the water. Let the machine run through 1 cycle before the new valve will dispense water. Done.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Replaced the water valve kit as I can tell water is getting to the valvebut it was not getting past it. Still not working after replacing the valve and it may be the electrical to the valve selenoid that is the problem.
Reached in from from of machine to repace the pump amd took bottom front panel off to change the solenoid. Had ordered the pump some time ago because it was noisy. This icemaker was purchased in 1978 and I have maintained it over time with ordered parts. It stll works great and is valued by the family for the beautiful ice free of refrigerator odors.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.