Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/0UBTUTUP.gif
See part NI in the diagram
http://www.partselect.com/Schematics/Maytag/0UBTUTUP.gif

Conversion Kit - NG - LP

PartSelect Number PS11744583

This kit is used to convert from natural gas to liquid propane.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$19.74

You Save

$3.29

Your Price

$16.45
Order within the next 7 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

6 of 10 people found this instruction helpful

Parts Used:
  • Conversion Kit - NG - LP
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Gary from Springfield, MO

Needed to covert from ng to lp

It could not have been easier. All I had to do was switch out the jets in each burner. First I had to sort the new jets and match to the correct burner by referring to the owners manual. Then I removed each burner and replaced the jet one at a time. Finally I had to turn the adjustment screw on each control knob clockwise until it would not turn anymore. Plug in to an electric outlet and it was good to go.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Conversion Kit - NG - LP
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Wrench (Adjustable)
Customer: Alan from JACKSONVILLE, TX

No information to specify which jet goes to which burner when converting to lp

Go to YouTube and find video of conversion to your or stove like yours. Then Google your model number to find your manual and find the section that tells the BTU output of each burner. They will be something like this, 5000, 7200, 12500, 15,500, etc. The logic of the orifices is small BTU=small hole in jet, large BTU=large hole in jet. Carefully inspect your jets in the conversion pack and assign which jet goes where according to hole size by burner size and BTU output. If it seems wrong when you start the stove, you might have to swap jets with another burner to get it right. Be sure to convert your incoming regulator to the LP setting by reversing the plunger under the cap. Use crescent wrench to remove cap. You must also be sure to have a regulator on your propane source. Happy converting!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2