11744544-1-M-Whirlpool-WP7432P109-60-Spark Igniter
Part Location Diagram of WP7432P109-60 Whirlpool Spark Igniter
See part 5 in the diagram
( Grid squares measure 1x1 inch )
11744544-1-S-Whirlpool-WP7432P109-60-Spark Igniter 11744544-2-S-Whirlpool-WP7432P109-60-Spark Igniter 11744544-3-S-Whirlpool-WP7432P109-60-Spark Igniter Part Location Diagram of WP7432P109-60 Whirlpool Spark Igniter
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Spark Igniter WP7432P109-60

 Fits your CCGP2720PU!
★★★★★
★★★★★
2 Reviews

Rated by 3 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 52.81
  On Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your CCGP2720PU!
PartSelect Number PS11744544
Manufacturer Part Number WP7432P109-60
Manufactured by Whirlpool
Product Description

Spark Igniter Specifications

This part creates the spark that lights the gas and starts the burners.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Cooktop, Range.
This part works with the following products:
Jenn-Air.
Part# WP7432P109-60 replaces these:
AP6011348, 71002724, 7432P109-60
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Horace A - March 11, 2019
  Verified Purchase
Replace igniter
I had no problem with the installation because of it was the right part, and was very satisfied
★★★★★
★★★★★
Sam T - March 16, 2018
  Verified Purchase
Just a snap
Quick n easy
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
stove top gas burner ignitor only flicks but does not light burner
If you have a burner that begins to constantly flick without lighting, and/or flicks while you are lighting another burner, it is likely time to order a new ignitor. Once received, we first lifted the burner support rack, then the burner cap, then unscrewed the nut holding the metal bracket that holds the ignitor in place (years ago we had to "soak" the nut with a loosening spray prior to being able to unscrew it, so since then we do not tighten the nuts too tightly so that each nut is easy to unscrew by hand or with pliers if necessary). The previous steps allow one to lift the burner ignitor up and out of its resting hole. It will be connected to the electric wiring via a plastic connector. All one has to do is pull the wiring away from the ignitor and then push it up into the new ignitor. The plastic connector protects you from touching the live ends of the wiring. Voila! The burner lighted successfully.
Read less
  • Marlene from Dana Point, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
As soon as the parts arived it tooks only 1 1/2 hours to get everything fixed
took the nuts off &replaced the new ignited
  • Robert from Pleasanton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not stop igniting even after fire was on
unplugged unit from wall, disconnected gas line, and untaped the vent. disconnect the control knobs and unplugged and removed the control unit from the main unit. pulled the main unit out from the countertop and set it on a table. disconnect the burners and spark iginiters from the main unit. undo screws holding chrome brackets and stove base, to access iginiter. disconnect wiring from igniter and the one screw, replace iginiter. reverse everything to re-install
Read less
Other Parts Used:
Spark Module Spark Igniter
  • Bill from Pearland, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Wrench set
19 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Mounting Nut
$7.59
$7.59
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744544
Manufacturer Part Number: WP7432P109-60
Brand
Model Number
Description
Jenn-Air
CCG2423B
Cooktop - Gas
Jenn-Air
CCG2423Q
Cooktop - Gas
Jenn-Air
CCG2423S
Cooktop - Gas
Jenn-Air
CCG2423W
Cooktop - Gas
Jenn-Air
CCG2523B
Cooktop - Gas
Jenn-Air
CCG2523W
Cooktop - Gas
Jenn-Air
CCGP2420P
Cooktop - Gas
Jenn-Air
CCGP2420PF
Cooktop - Gas
Jenn-Air
CCGP2420PG
Cooktop - Gas
Jenn-Air
CCGP2420PR
Cooktop - Gas
Jenn-Air
CCGP2420PU
Cooktop - Gas
Jenn-Air
CCGP2720P
Cooktop - Gas
Jenn-Air
CCGP2720PG
Cooktop - Gas
Jenn-Air
CCGP2720PK
Cooktop - Gas
Jenn-Air
CCGP2720PU
Cooktop - Gas
Jenn-Air
CCGP2820P
Cooktop - Gas
Jenn-Air
CCGP2820PR
Cooktop - Gas
Jenn-Air
CCGP2820PU
Cooktop - Gas
Jenn-Air
CCGX2420B
Cooktop - Gas
Jenn-Air
CCGX2420N
Cooktop - GAS COOKTOP
Jenn-Air
CCGX2420W
Cooktop - Gas
Jenn-Air
CCGX2620B
Cooktop - Gas
Jenn-Air
CCGX2620W
Cooktop - Gas
Jenn-Air
CLGP2720P
Cooktop - GAS SURFACE UNIT
Jenn-Air
CLGP2720PG
Cooktop - GAS SURFACE UNIT
Jenn-Air
CLGP2720PK
Cooktop - GAS SURFACE UNIT
Jenn-Air
CLGP2720PN
Cooktop - GAS SURFACE UNIT
Jenn-Air
CVDX4180B
Cooktop - Gas
Jenn-Air
CVDX4180W
Cooktop - Gas
Jenn-Air
CVGX2423B
Cooktop - Gas
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Spark Igniter
$ 52.81
  On Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.