Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shannon
February 21, 2018
I am wanting to change out the lower unseen baking element how do you go about that?
For model number JJW9830DDS
Hi Shannon,
Thank you for your question. Unfortunately we do not have a video on your appliance directly, however we do have an installation video on how to install a hidden bake element. Here is the link to that video: https://youtu.be/bvZzEg90ZKA. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chad
March 27, 2018
How do i remove the baking element from the upper oven.
For model number JJW9630DDS
Hi Chad,
Thank you for your question. There is a video on our website that you can reference on how to install the bake element. The the oven and the bake element in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS3633414. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chad
March 27, 2018
How do I access the hidden baking element in the upper oven. The video I was sent is incorrect the bottom of the oven does not lift out. Thanks
For model number JJW9630DDS
Hi Chad, Thank you for the question.Here is a link to a video on how to access a hidden bake element. Hope this helps!
https://www.youtube.com/watch?v=bvZzEg90ZKA
Was this helpful?
Thank you for voting!
Shannon
February 21, 2018
How do i change out the bake element? Do i need to pull the oven out of the wall?
For model number jjw9830dds
Hello Shannon, thank you for your question. The appliance should not have to be removed from the wall. First turn off the power to the unit, or unplug it. Open the oven door, remove the racks and locate the mounting bracket (if there is on) that holds the back of the element onto the back wall of the oven. Remove the two screws that hold that bracket, then gently pull the bake element out enough to disconnect the wires. Make sure to have something on hand (like a clothes pin) to hold the wires from pulling back into the wall of the oven. Reattach the wires to the terminals on the element then push the element back into place. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
