Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nicholas L - September 8, 2022
Verified Purchase
Part works great.
But I had to get an appliance repair person to install. Required removal of more than a dozen screws, not four as stated on the web, and a substantial amount of disassembly.
★★★★★
★★★★★
Philip T - January 22, 2019
Verified Purchase
Easy repair, great part -- Work as expected!
The part is in great condition, and came in fast. My appliance is back in working order.
★★★★★
★★★★★
Nancy * - February 5, 2018
Verified Purchase
Quick ship, easy repair, excellent part !
My front range burner stayed on high heat. By searching PartSelect, I found the correct solution. The part is in and my stove is cooking perfectly !
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Element switch needed repair as did an element size selector.
I remoed the two screws that hold the element switch in place and replaced the attached wires in an identical manner as I removed them from the previous bad switch. It was easy and workes perfectly.
TURNED OFF POWER TO STOVE Removed 5 Knobs, 2 screws that held bad switch. Removed 4 screws and lifted panel up and forward to expose switches. Adjusted spring tension on knob stem to hold knob ( stem in new switch slightly smaller) removed wire from defective switch one at a time and fastened to new switch in sequence. Re
... Read moreassembled and turned power on. Defective switch had stuck contacts making it full hot.
Read less
RICHARD from PARADISE, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
16 of 39 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashley
January 18, 2018
The large burner on this stove heats except when i turn the switch to "low", then the burner goes cold. When i move the switch knob to the first indice above "low" the burner heats. I suspect the switch. Is this a good assumption ? ( all other burners are working great) this is a great stove and i really love it. Other than this little problem, the stove is great. Thank you, ms ashley hall, cornelius, oregon.
For model number ART6112WW
Hi Ashley,
Thank you for your question. Yes, you are correct. If you are trying to adjust the switch and the burner is not responding as it should, then the issue is with the switch and it will need to be replaced. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
October 15, 2019
My burner kept heating when it was in the off position. Thinking the switch is bad?
For model number Ak2t30e4
Hello Todd, Thank you for the question. Yes, the most likley issue is a defective switch that controls the element with the issue. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
February 14, 2020
Hello,
Looking to purchase a infinite switch for our stove top on one of the burners. Our stove top would show that one burner is still on. I am thinking that is the problem? Thoughts? Looks like your part number is ps11744436. Looking at the connection numbers they are different. Is this the correct switch? Is there a diagram showing the updated wire connections if it is the correct switch. Your help is greatly appreciated.
For model number akt3650e
Hi Mike. The right switch depends on which burner is faulty. We do not have a wiring diagram. You will need to take note of the positions of your old switch and connection them one at a time. Thank you for your question and good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
