Quick Question!

Have you ever purchased from PartSelect.com before?

11744318-1-S-Whirlpool-WP74009336-Burner Electrode
11744318-1-S-Whirlpool-WP74009336-Burner Electrode http://www.partselect.com/Schematics/Maytag/59565.gif

Burner Electrode

PartSelect Number PS11744318

This part has a male spade and helps your burner ignite and produce flame. If a wire lead is needed, you can purchase locally.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows, but will not light.
  • Will Not Start.
  • Element will not heat.

Compare At

$22.04

You Save

$3.67

Your Price

$18.37
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 18 reviews What's this?
16-18 of 18
 

0 of 2 people found this instruction helpful

Parts Used:
  • Burner Electrode
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: james from neuvo, CA

Ignitor cracked on 3 of my gas top buners

I used a star head driver to take of burners ,then pulled wires out about 2 inches unplugged old ignitors and plugged in new ones

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
  • Burner Electrode
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Ed from Overland Park, KS

The ignitor went out on one of the burners of the gas range

Remove the burner cover to reach the burner assembly. From the top of the cooktop you will see 2 screws holing the burner assembly. Using a T drive (6 point screwdriver)remove both screws and the burner assembly will come out of the cook top. Using a phillips head screw driver, remove the old ignitor from the burner assembly. Mine was galled up, so I had to use some penetrating oil and let it sit for a half hour. I then used a hammer and a phillips head screwdriver to tap the screw as I twisted to un-tightened the screw. Once it broke loose, I placed the new ignitor and reassembled the burner into the stove.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 7 people found this instruction helpful

Parts Used:
  • Burner Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Douglas from La Habra, CA

Broken electrode

First I tried twitching my nose....after I stopped sneezing I got a screw driver and put the new electrode in and gosh in gahiggy, it worked!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-18 of 18