Quick Question!

Have you ever purchased from PartSelect.com before?

11744254-1-S-Whirlpool-WP74008718-Rocker Switch - Black
11744254-1-S-Whirlpool-WP74008718-Rocker Switch - Black 11744254-2-S-Whirlpool-WP74008718-Rocker Switch - Black 11744254-3-S-Whirlpool-WP74008718-Rocker Switch - Black http://www.partselect.com/Schematics/Maytag/42099.gif

Rocker Switch - Black

PartSelect Number PS11744254

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.

Compare At


You Save


Your Price

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews What's this?
1-2 of 2

7 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Pete from Longwood, FL

Center element of triple burner was not working.

I pulled the unit out from the wall. Took the screws out along the sides. Removed screw holding the front controls loose. First I changed the control switch which was very easy. Two screws and a couple of wires. The burner was a bit more tricky. I had propped the glass cook top up so I would not have to disconnect to many wires. Took out the screws holding the burner in place and disconnected the wires. I removed the clips from the old burner and attatched them to the new burner, then reinstalled the new burner. The only real problem was the wires. I forgot the order of a couple of them. I was able to check on line and get the correct order.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 8 people found this instruction helpful

Parts Used:
  • Rocker Switch - Black
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: David from Westminster, CO

Multiple size burner would only go to small size

popped out the old one with a screwdriver discconnected two wires, reconnected the wires to the new rocker sitch and popped in the new one..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2