This assembly contains 4 ignition switches and the wire harness.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Cooktop.
This part works with the following products:
Maytag, Amana, Magic Chef, Jenn-Air.
Part# WP74007696 replaces these:
AP6011002, 74007696
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
One burner would not spark
I removed all burners and lifted the top off. The system was two wires so simple to replace. I didn't know I could get the top off so easy. I first removed the fire box but couldn't see how to remove the top. I then realized that the burners mated the box and top. Easy fix since I had the right parts.
Carl C from Ponca City, OK
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One gas burner (electronic ignition) would not click
Remove all 4 dripless pans; lift off the cooktop (from the base unit); remove and replace the switch / lead wire assembly; replace the cooktop and the dripless pans.
Wayne from Basking Ridge, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob
March 5, 2018
Problem; only one control knob turns on [ all four ] the ignitors,.Do i need a new module or igniter switch to have the other 3 ignitors work? So, 3 knobs do not turn on the spark igniters, only one does.
For model number AKS3040BSS
Hi Rob,
Thank you for your question. If one knob is turning on all four burners, the issue is the igniter switch assembly and you will need to replace it. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Matt
July 26, 2019
Good gas flow, ignitors spark, lights and burns when lit with match. However, all four starters will not start upon ignition.
For model number MGC5430BDS
Hello Matt, thank you for inquiring. This is most likely due to a faulty Igniter Switch Assembly. This Igniter Switch Assembly part number PS11744193 is the correct replacement for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
