Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11744176
This part ignites to help bake your food.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Change Temp Sensor-Turn off the power or unplug unit, remove oven racks, removed the two screws that hold temp sensor, pull out and unplug.Change Igniter-Remove two front screws holding bottom cover on and lift out of place, next remove the two wing nuts holding square plate on, next remove the three screws holding gas tube in place, remove gas tube pulling wire carefully through and unplug it. Remove the two screws that hold igniter to gas tube. I found it easier to pull stove out and remove back bottom left square cover held in with four screws to fish the igniter cable back through.Oven now heats to 350 in 8 minutes.
Help other customers find the most helpful instructions.
Were these instructions helpful?
repair was easy. remove the covers to get to the igniter. the connection is in the back of the range, requiring the removal of the back panel of the range, but it was easy once the range was pulled out.
This was quick and painless. Just had to remove the cover at the bottom of the oven and remove the burner. Unhooked the wireA couple of screws held the igniter on the burner. Took those off and replaced it with the new one. Done deal. This took no more the 5 minutes to complete and it works like a charm!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.