Quick Question!

Have you ever purchased from PartSelect.com before?

11744018-1-S-Whirlpool-WP74003122-Dual Surface Burner Switch
11744018-1-S-Whirlpool-WP74003122-Dual Surface Burner Switch 11744018-2-S-Whirlpool-WP74003122-Dual Surface Burner Switch 11744018-3-S-Whirlpool-WP74003122-Dual Surface Burner Switch http://www.partselect.com/Schematics/Maytag/59196.gif

Dual Surface Burner Switch

PartSelect Number PS11744018

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.

Compare At


You Save


Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews What's this?
1-1 of 1

27 of 36 people found this instruction helpful

Parts Used:
  • Dual Surface Burner Switch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Robert from Medina, OH

The old switch would not regulate the temperature - running too hot

flipped off breaker
Pulled the stove from the wall about 2 feet
Removed back cover (4 screws)
looked at existing switch - it was different than the new switch, but the instructions were spot on for the retrofit
I marked the back of the new switch with the retrofit locations of the wires
pulled off the knob
removed 2 screws from the front of the range that holds the switch
removed old wires using needle nose pliers
attached new switch re-using same 2 screws from the front
one at a time attached the wires to their proper location
pushed knob back on
reset the breaker
tested the new switch - all was OK
switched off breaker again
replaced the back cover
slid range back in place
Breaker back on

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1