Quick Question!

Have you ever purchased from PartSelect.com before?

11743975-1-S-Whirlpool-WP74001278-Screw - White
11743975-1-S-Whirlpool-WP74001278-Screw - White 11743975-2-S-Whirlpool-WP74001278-Screw - White 11743975-3-S-Whirlpool-WP74001278-Screw - White http://www.partselect.com/Schematics/Maytag/35010.gif

Screw - White

PartSelect Number PS11743975

This screw is sold individually.

This part works with the following brands: Maytag, Jenn-Air, Kenmore, Litton, Amana.

This part works with the following products: Range, Wall Oven, Microwave Oven Combo.

Compare At


You Save


Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1

10 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Robert from Dayton, OH

Handle to top oven coming off

It wasn't the handle that was broken, it was what the handle was attached to that was. I removed the door by opening to first detent and just lifting the door upward. Once off, I removed the screws on the top sides and underneath - a total of 9. This allowed me to remove the edging on the sides and underneath - the front glass came with it as well. Then I removed the Top trim by removing a screw on each of the sides and two on the front - this was the piece that was broken. Since I had already disassembled most of the door, I went ahead and dismatled the rest so that I could clean everything. The pieces that would fit went into the dishwaser and the rest (including the glass) I washed by hand (except the white insulation pieces of course). I did take apart the double glass panel by lifting up on a bent tab on one of the corners - this allowed me to clean the insides as well as the groves in which the glass sat. After everything was clean, I reassembled everything in the reverse order substituting the new trim for the old.

Notes: The top of the trim piece has two diferent screws - two short ones that screws into the trim piece itself and two that go through to the door metal. The screw that I ordered ended up being one of the short ones and I wanted the other. The snap nut was correct, and was what the longer screw to the trim actually grabs on to. I ended up using one of my own screws that fit like a dream, but wasn't painted white. The other note is that the sheet metal that the trim piece screws into from the front was slightly stripped. All I had to do was to place the metal on a hard surface and hit the holes with a hammer to bring them back into a usable form - not ideal, but worked nonetheless.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1