Quick Question!

Have you ever purchased from PartSelect.com before?

11743883-1-S-Whirlpool-WP71002461-Radiant Element - 8" - 2000W
11743883-1-S-Whirlpool-WP71002461-Radiant Element - 8" - 2000W 11743883-2-S-Whirlpool-WP71002461-Radiant Element - 8" - 2000W http://www.partselect.com/Schematics/Maytag/33641.gif

Radiant Element - 8" - 2000W

PartSelect Number PS11743883

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.

Compare At

$128.82

You Save

$21.47

Your Price

$107.35
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews What's this?
1-1 of 1
 

7 of 9 people found this instruction helpful

Parts Used:
  • Radiant Element - 8" - 2000W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench set
Customer: Garth from Cypress, TX

Element had burnt out....break in actual element

I first removed the plug in module on the left hand side. I then removed the six screws holding the tempered glass in place. Lifting straight up it then exposed the two elements. I unplugged the two wires connecting the large broken element and lifted up gently thus enablying the two loosely mounted screws to come out of their mounting bracket. I took those two screws out and put them in the new one carefully lining up the screws with the holes in the base element to the support ( this in my mind is the poorest design in an otherwise well thought out assembly ).....once satisfied it was stable, I hooked up the two wires and tested the element using a multi meter. Mine was a series 8 and I installed a series 11 so the wiring was slightly different but easy to figure out. I put the glass back on top again and installed the screws. The module was carefully slid back into place and I retested the element with power.....all was fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1