Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743870
The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, if this filter is 1/2" less wide than the original, it will still function the same.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Remove Vent Cover, Remove Old Filter, Replace With New Filter, Replace Vent Cover, Repair Complete
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the fan cover; took out the two screws holding the escutcheon plate on and started to lift out the plate when I made contact with the bracket, thereby popping the circuit which I had neglected to shut off. No problem. I removed the existing fan/light switch, salvaging one of the 'push' nuts. I inserted the switch into the new plate, pinned it in with the salvaged nut plus a similar one that I had got at Lowe's; reattached the escutcheon to the stove frame; turned on the power and all worked perfectly. My experience with PartsSelect was a 10 out of 10-got the right parts the first try; they fit well; repair went smoothly, and the head of the kitchen is happy.
Remove cover and install
Nice filter. Exact fit. Had a little ring to use to pull out to clean. Shipment was packed well.
It was hard. I simply replaced the old one!! fIT PERFECTLY.:-)
Removed old grease filter,replaced with new grease filter. No tools needed.I ordered the grease filter on Tuesday and it arrived at my door on Wed.Best experience ever ordering a part, I will definitely use Part Select again and have already recommended it to friends.
removed two screws, pulled up hardware / components, unplugged the old switch, (remember to switch off the circuit breaker!) the two 'fasteners' that are supposed to keep the switch tied to the cover panel did not fit, so i had to use epoxy to secure the switch. no problem though.
just inserted in to proper place
removed the old by pulling it out of track and replaced it with the new filter
I just had to drop the grease filter into the slot. It took less than a second. But what I am really pleased with is that it took less than a day and a half to get the part. I ordered it on thursday morning. It was shipped on thursday afternoon and in my driveway by friday noon!!! Wow!!! How great was that!!!!!! The fastest service I've every had for anything!! Bravo!!!!!!!! To all your workers!!!!! Rrm
Removed the old filter from the top of stove and put the new one in. Took about 10 seconds.
I simply removed the old filter and replaced it w/the new filter. It came in record time and I'm very pleased w/the service I received.
I removed the old burners from the stove top. I then removed the screws holding the two burnes on to the mounting plate. Used WD-40 to loosen them up.I removed the old burners and put the new ones onto he plate then re-installed the burners on to the stove..............a cinch. Easy as pie, piece of cake.Thanks!
First we removed the door from the stove. Removed all the screws and removed the damaged seal. We replaced the seal and re-assembled the door.
easily put all parts on without the use of tools.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.