Quick Question!

Have you ever purchased from PartSelect.com before?

11743870-1-S-Whirlpool-WP71002111-Grease Filter
11743870-1-S-Whirlpool-WP71002111-Grease Filter 11743870-2-S-Whirlpool-WP71002111-Grease Filter 11743870-3-S-Whirlpool-WP71002111-Grease Filter http://www.partselect.com/Schematics/Maytag/33182.gif

Grease Filter

PartSelect Number PS11743870

The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, if this filter is 1/2" less wide than the original, it will still function the same.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.

Compare At

$13.78

You Save

$2.30

Your Price

$11.48
Order within the next 12 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 31 reviews What's this?
1-15 of 31
 

502 of 509 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gene from Washington C.H., OH

Replace grease filter

Just a couple of minutes to left off the cover grid, left out the old filter and drop in the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

368 of 374 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: John from Berkley, MI

Blower motor died and I needed to replace it

Most of the repair was obvious as I took the blower apart before ordering the parts. Unfortunately the new motor was significantly larger than the original motor so I had to um. Adjust the position of some of the other parts to fit it in. There was a sheet metal flange that was installed on the other side of the blower from the motor which was designed to focus the air flow into the blower. I used a hammer to ajust the angle of flange so it no longer extended as far into the blower housing.

It works just fine although its a bit louder than the old motor was.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

169 of 325 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers, Wrench (Adjustable)
Customer: judie from mays landing, NJ

Interior drawers were off their rollers

pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and had to call a repairman to adjust the dishwasher and alighn it to open and close properly. but i did do good inside. i feel it was easy and a success. thank you for having the supplies for us to attempt to repair it on our own.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

76 of 82 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: More than 2 hours
Tools:
Customer: Michael from Eden, VT

Regular parts replacement/maintenance.

We love our Jenn-Air electric range that we have owned since 1983 and couldn't get parts from where we bought it recently. We called around to Sears and other appliance dealers and they couldn't help us. We found your company searching on the internet and we are very much pleased with your parts listing and your great service. We will be back. Jody and Mike Hayden, Eden, Vt.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

93 of 157 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Marie from New Smyrna Bch, FL

Needed to replace filter

Just placed it at the filter location. Liked the ring feature on the filter for ease of removal for cleaning. My previous ones didn't have such feature. Thank you for filling my order. I bought an extra filter for the future. I'm a big user of my Jenn-Air range. I may soon be needing to replace my griddle. Will be contacting your company then.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

70 of 132 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: More than 2 hours
Tools:
Customer: Brenda from Simsbury, CT

Replacement parts needed - filter, grill, grates

Replacement parts were ordered - there was no 'repair work' involved. Parts were received within 5 business days.

I had a problem finding the 'grill part' on the web site. I ended up calling the telephone number provided on the web site and the representative was very helpful.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

65 of 126 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Linda from Palo Alto, CA

Old grease filter was bent and needed replacing

I simply lifted off the grille in the center of the stove, pulled out the old filter and dropped the new one in. It sits at an angle (right side down, left side up) rather than slotting in to a particular spot.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Judy from San Jose, CA

Parts were worn and dated.

I removed teh pans and great filter.

I removed the screws from the older Rear and front burner assembly and use them on the new parts. It just took about 20 mins to do all 4 burners.

Checked that the gas worked for all 4 burnes once assembled. Then replaced the pans and the grease filler.

Results have been great as the gas burners ignite faster and the stove top looks brand new :-)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Billy from Twentynine Palms, CA

Installed new fiberglass gasket and glass window

I removed about 8 screws to disassemble the door to get the gasket in. This was an easy task. On the first use of the oven, it shattered one pane of the double glass door window. I think I installed it backwards since one pane is tempered glass, I believe. I installed the new window and am heating it up now - hope it doesn't break.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Vincent from Foxboro, MA

Needed new filter

Replace filter

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Karen D from Columbia, MD

Time to replace the filter

lift out old filter, wash, put in new filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Freda from Elizabethtown, NC

Grease filter needed replacing

Remove old filter- put in new filter. EASY!!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: charles from Newton, NH

Grease filter did no fit much to large

switch went well
removed 4 screws and lifed front panal up and out

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Peter from Wilson, NC

Not a prblem,just necessary to replace

even though these sre washable filters it's still necessary to change them after so much time

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Grady E from Vidalia, GA

Needed replacement filters

Remove Vent Cover, Remove Old Filter, Replace With New Filter, Replace Vent Cover, Repair Complete

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 31