This filter is made of metal and is intended for use with ranges and cooktops. Grease filters are an important but often neglected part of ranges. If the filter is full, your extractor fan will become noisier, and cause a bad odor to come from your range. Neglecting the grease filter can also pose a fire hazard in your kitchen. Regular maintenance and cleaning of the grease filter is important and will make the part work more efficiently and last longer. It takes about 30 seconds to replace your grease filter. While replacing the filter, take a minute to check for a grease buildup underneath, and clean out any drip-through grease. As per the manufacturer, if this filter is 1/2" less wide than the original, it will still function the same.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Vickie S - 25 days ago
Verified Purchase
Filter
Works fine
★★★★★
★★★★★
Laura De M - March 14, 2024
Verified Purchase
Easy Repair
I ordered a new grease filter for my Jennair range. When it arrived it was exactly what I needed and installation was a breeze!
★★★★★
★★★★★
Daniel W - December 10, 2023
Verified Purchase
Grease filter
The part came quickly and fitted perfectly
★★★★★
★★★★★
Joan T - August 16, 2023
Verified Purchase
JenAir stovetop filter
I was worried I wouldn’t find the right part for my JenAir since it is more than 10 years old! The part I ordered fits perfect snd I am so glad I ordered it!
★★★★★
★★★★★
Susan B - June 5, 2023
Verified Purchase
Did the trick...
Although I didn't receive the part as quick as I expected, it was packaged perfectly and works wonderfully. Thank you!!
★★★★★
★★★★★
Terry R - April 19, 2023
Verified Purchase
Exactly what I needed
The part was the correct thing that I needed and it fit .
★★★★★
★★★★★
Andrew R - February 11, 2023
Verified Purchase
Replacement vent filter: exactly the right part
Replacement vent filter: exactly the right part. Shipped very quickly and fits the oven just like the original.
★★★★★
★★★★★
Janet F - July 17, 2022
Verified Purchase
Perfect!
Part was perfect and was delivered quickly!
★★★★★
★★★★★
David C - April 15, 2022
Verified Purchase
JennAir grease stoppers
It was good packaging was not done well
★★★★★
★★★★★
Margaret B - March 4, 2022
Verified Purchase
Great part ,easy to put in and maintain
Easy to order and easy to install. Thanks
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 39 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The oven door was not staying completely closed and made loud noise when opened.
Slide appliance forward approximately one foot. Open oven door to the broil position and lift oven door straight up and off of the hinges. Remove warming drawer or lower faceplate. If equipped with a grease trap remove by removing two Philips head screws and sliding down off the ridged grease line. Remove the two hex head screws on the f
... Read moreace of the frame while supporting the hinge. *** WARNING*** this is where it can be difficult to do for a do it yourselfer. The mounting holes on the new hinges DO NOT come with threads to accept the mounting screws. You will have to use a Tap and Die set to determine the thread and cut your own threads into the hinge mounting holes. Once complete reinstall new hinges into oven and attach with the hex head screws. reinstall the grease trap and warming drawer or face plate. Position the hinge in the partially open position on both sides and slide the oven door back onto the hinges. Close and open oven and verify smooth operation and no gaps exist around door when closed.
30 year old stove, w/ completely worn out oven door gasket. Replace grease filter.
First Inserted 2x4x 36" length of wood behind the spring loaded door hinges to ease removing the oven door as I worked alone (this was recommended in a previous post and was essential when working alone, TY). Removed 2 retaining screws on the interior side of the door at the hinge locations. Slid the door up an off the hinges, moved door
... Read moreto a cloth pad protected work bench. Took the door and glass panels apart removing all the related screws, retaining clips; taking note of screws, retaining clip and panel locations for reassembly. Removed the insulation, removed the glass window pack, and removed of all rust fragments (dust) between the 2 glass window panels. The glass window pack metal molding retainer, on the oven interior side of the glass window had completely rusted away. Removed the existing oven door gasket. Cleaned the glass door window pack, and interior side of the oven door surface. Installed the new gasket, which fit very well. Tightened the loose door handle screws. Reassembled in reverse order all door components noted above, and replaced the door onto the hinges, fastened the 2 door hinge screws, removed the 2x4x36" wedge holding the hinges in the open position, and closed the door. Job complete. Thanks to previously posted directions as a good guide. Hope this helps as well.
Fortunate to have the replacement parts available. Wish a replacement door window pack was available, as the double glass, metal edge seal is deteriorating, and the metal molding retainer that held the glass in place is completely rusted away on the oven side of the existing window pack. Plan to find heat resistant caulk to seal the glass in the door, in lieu of the metal molding glass retainer.
my Jenn-air stove is 32 yrs old. Its heave well made and works. I Didn't want to deal with researching to find new down draft that would not fit the same as old one. The Element was perfect solution..fast easy cheeper than new stove and installation bill!!!
EXTREMELY simple - drop in. AND- the part cost less than half the price quoted by appliance vendor...2 years earlier !!! This site is a marvelous resource for parts one can install with minimal skill.
Mark from STAUNTON, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
filter was deteriorated from 15 plus years of use
lifted the top center panel off removed old filter installed new easy peesy
Steve from Marshall, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced grease filter
took out old one and after straightening out the significant bends in the metal frame holding the screen, that were caused by shipping the screen in too flimsy of a container, I installed this into the range.
I Destroyed My Grease Filter In The Dishwasher And It Just About Disintergrated.
I just had to drop the grease filter into the slot. It took less than a second. But what I am really pleased with is that it took less than a day and a half to get the part. I ordered it on thursday morning. It was shipped on thursday afternoon and in my driveway by friday noon!!! Wow!!! How great was that!!!!!! The fastes
... Read moret service I've every had for anything!! Bravo!!!!!!!! To all your workers!!!!! Rrm
Read less
Rosetta R. from Jamaica Plain, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter was coming apart, door gasket was dirty and fraying
Opened the range grid, popped in the new filter, seconds after that I pulled out the old door gasket, put in the new with its little poppers and that's it. Both jobs took me less that 3,minutes. Great.Easy install for both products.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Will
October 13, 2017
Seek dimensions of grease filter ps11743870. Thanks.
Hi Will, Thank you for the question. This filter is Approximately 6-1/4 inches x 15-1/2 inches.Hope this helps!
59 people found this helpful.
Was this helpful?
Thank you for voting!
Carolyn
November 14, 2018
What are the dimensions of the grease filter? We need to replace ours which measures 15 1/2 by 6 1/2.
For model number SVE47600
Hi Carolyn, Thank you for the question. This filter is Approximately 6-1/4 inches x 15-1/2 inches. As per the manufacturer, if this filter is 1/2" less wide than the original, it will still function the same. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Monique
August 13, 2021
Bonjour,
I saw the dimensions in other people’s questions/answers.
our grease filter is 15.5’ x 7’.
your replacement part is not as wide with 6 1/4 inches.
would this work nonetheless?
thanks!
For model number S105-C Jenn-Air
Hi Monique,
Thank you for your question. The dimensions of the filter are approximately 15-1/4 inches by 6-1/4 inches. If S105-C is your model number, then this filter will fit on it. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Delia
November 19, 2017
Hi will this Whirlpool filter work in the above 25 year old range? Dimensions are 16 1/2 x 6 3/4 approx
For model number SEG196
Hi Delia,
Thank you for your question. Yes, this would be the correct filter for your appliance. I hope this helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Angela
January 16, 2023
Hello, looking for a cooktop downdraft vent grease filter for my Jenn-Air. Approximately 16.5 x 9 inches long. Previous filter was Y706012. Thank you
For model number Y706012
Hi Angela, thank you for asking. The cooktop downdraft vent grease filter you are looking for is part number PS11757584. If you require assistance to place an order, please contact customer service. We hope that helps!
