Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743863
This temperature probe consists of two ends joined together by an insulated wire. The small end is almost four inches long, whereas the longer end is almost seven inches long. The small end, the jack, plugs into the range, while the longer end, the probe, is inserted into the meat. This brown and metallic temperature probe is intended for use with some ranges and some older convection microwave ovens.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
As the probe is a plug-in item that would normally be out of the oven, there was nothing more to the repair than checking that the new probe plug fitted the socket and that it was detected by the oven. Then the old probe was consigned to the trash.Everything checked out, and the probe was used satisfactorily within a couple of days.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Very simple. A few screws removed, disconnected a few wires, reattached the wires, put back the screws all without a single cuss word
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.