Quick Question!

Have you ever purchased from PartSelect.com before?

11743863-1-S-Whirlpool-WP71001870-Temperature Probe
11743863-1-S-Whirlpool-WP71001870-Temperature Probe 11743863-2-S-Whirlpool-WP71001870-Temperature Probe 11743863-3-S-Whirlpool-WP71001870-Temperature Probe http://www.partselect.com/Schematics/Maytag/35240.gif

Temperature Probe

PartSelect Number PS11743863

This temperature probe consists of two ends joined together by an insulated wire. The small end is almost four inches long, whereas the longer end is almost seven inches long. The small end, the jack, plugs into the range, while the longer end, the probe, is inserted into the meat. This brown and metallic temperature probe is intended for use with some ranges and some older convection microwave ovens.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$67.30

You Save

$11.22

Your Price

$56.08
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

7 of 9 people found this instruction helpful

Parts Used:
  • Temperature Probe
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Nicholas W J from Worthington, OH

Temperature probe insulation broken down so short circuit

As the probe is a plug-in item that would normally be out of the oven, there was nothing more to the repair than checking that the new probe plug fitted the socket and that it was detected by the oven. Then the old probe was consigned to the trash.

Everything checked out, and the probe was used satisfactorily within a couple of days.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Bob from san jose, CA

Display burned out

Very simple. A few screws removed, disconnected a few wires, reattached the wires, put back the screws all without a single cuss word

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2