Quick Question!

Have you ever purchased from PartSelect.com before?

11743846-1-S-Whirlpool-WP707929-Grease Filter
11743846-1-S-Whirlpool-WP707929-Grease Filter 11743846-2-S-Whirlpool-WP707929-Grease Filter 11743846-3-S-Whirlpool-WP707929-Grease Filter http://www.partselect.com/Schematics/Maytag/33291.gif

Grease Filter

PartSelect Number PS11743846

Manufacturer Part Number WP707929
Manufactured by Whirlpool

This grease filter is almost fourteen inches long and almost twelve inches wide. This filter is intended for use with some downdraft cooktops and ranges.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.

Compare At

$17.00

You Save

$2.83

Your Price

$14.17
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 41 reviews What's this?
 

2 of 3 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Duane from Niceville, FL

Smell of a dead animal

The 15-year-old Jen-Air stove started smelling really bad. I thought it was a dead animal stuck in the exhaust tube which runs under the floor to the outside. I flushed it out with clorine bleach, but it was still bad. It turned out to the be the grease filter. I washed it every week in the diswasher, but it just was not enough to get it clean enough. Finally, the grease went rancid and smelled really bad. This "repair" took about 30 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Armen from Lowell, MA

Faulty fan switch and dirty grease filter

Removed 2 screws and lifted the control panal. Replaced the switch. Could not use nuts that came with the switch. Had to reuse the oringinals.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Difficult
Time to do repair: Less than 15 mins
Tools:
Customer: James from Devon, PA

Hmm, let's see, knob didn't match all my other new knobs

Oh this was a toughie and I was sweating it out.
With a delicate touch I removed the old knob and pushed on the new knob, 5 seconds

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Yong from Houston, TX

Change the oil/grease filter

It is so easy. Once I found the right size of filter from the website, I ordered it right away. It came in 3 days and I just need to take out the old one and insert the new one. No instruction is necessary. By the way, the price of the filter is one third of that from Jenn-air.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Marijo from Bennett, IA

Ordered a new filter for the exhaust fan

The filter came and it was bent out of shape on 2 sides. My husband carefully tried to bend it back into shape. It is very flimsy and is not made as well as the one that was being used that was probably several years old. I did not want the hassel of returning the filter and trying to get a new one sent.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Lynn from Chester, SC

Burner was not working & needed new grease filter

Parts arrived very quickly & the installation was quick & easy. Will order again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Martyn from Middletown, OH

The original grease filter was damaged in our dishwasher (it is quite fragile) and needed to be replaced.

1. Remove the exhaust vent cover, located in the center of the top of the range. It just lifts off.
2. Swivel the clamp 90 degrees to release the filter.
3. Remove the filter and throw it away
4. Place new filter in place and lock in place by rotating the swivel clamp back 90 degress.
5. Replace the exhaust vent cover

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ellery from Hammond, LA

Worn out parts

Replaced worn parts

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: linda from Amarillo, TX

Grill and filter burned/melted

Replacement isn't an install. Just put the grills on top, and the filter inside. Perfect fit. The great thing is the price. I purchased these off brand parts for about one third the price if i had purchased through the manufacturer!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: John from Bossier City, LA

New filter & new knobs

Simply replaced these items with no difficulty. John legrand

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Redona from Roseville, CA

Worn out stove top

We replaced the burner grates, knobs, air filter and burner pan. Looks as good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michael from Mountain Iron, MN

Old grease filter had hole wore through

Pulled the old one out & inserted the new one. Less than five minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Grease Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gerald from Maplefalls, WA

Filter replacement.

Remove and replace grease filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Robert A from Farmington `, CT

Really old looking stove top

Although I am a surgeon, my past experiences trying to repair worn-out 25 year-old appliances have not gone well. Therefore, I approached this entire episode with great deal of doubt and apprehension. However, the knowledge and helpfulness of the sales representative from whom I telephone ordered the units, the very clear installation instructions which promptly arrived with the units, and the very well engineered units themselves made the installation a breeze, less than ten minutes. I wish all my surgeries were this easy.

Robert A Gryboski, M.D.
Farmington, CT

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michelle from College Station, TX

Easy as pie

Just remove the old ones and replace them with the new ones. no tools necessary.

Help other customers find the most helpful instructions.

Were these instructions helpful?