Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/39776.gif
See part 9 in the diagram
http://www.partselect.com/Schematics/Maytag/39776.gif

Food Door Gasket (measured 32-1/4' by 39-1/4")

PartSelect Number PS11743836

This white fresh food door gasket measures approximately 32-1/4 inches by 39-1/4 inches. It is used on many fresh food doors of top mount model refrigerators that have been manufactured since 1980.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$128.17

You Save

$21.36

Your Price

$106.81
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Socket set
Customer: Velva from Southbury, CT

The freezer was making ice on the food. The ref.'s gasket was ripped.

Emptied the freezer and removed the door. Removed the screws from the gasket and replaced the new gasket and lined up the new gasket put the door back on then the door would not close right. Fixed the problem.
Now the Referator removed all the food off the door and removed the door. Did the same as freezer and the door was having trouble closing. And the gaskets were not fitting right by not fitting tight. So we have to use a heat gun to make the gaskets fit tighter on both freezer and refrigerator. It also took the two of us to handle the job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Food Door Gasket (measured 32-1/4' by 39-1/4")
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: William from Madison Heights, VA

Fresh food door gasket needed to be replaced

I took several screws out at one time because the new gasket had holes in the gasket. The screw had to go through the holes in the gasket. The old gasket just popped behind the grove on the door panel. After the gasket was installed I used a hair dryer to relax the gasket and it contoured to the door and refrigerator opening. The repair was successful.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2