Quick Question!

Have you ever purchased from PartSelect.com before?

11743835-1-S-Whirlpool-WP70048-3-Food Door Gasket (measures 30-3/4" by 39')
11743835-1-S-Whirlpool-WP70048-3-Food Door Gasket (measures 30-3/4" by 39') 11743835-2-S-Whirlpool-WP70048-3-Food Door Gasket (measures 30-3/4" by 39') 11743835-3-S-Whirlpool-WP70048-3-Food Door Gasket (measures 30-3/4" by 39') http://www.partselect.com/Schematics/Maytag/39891.gif

Food Door Gasket (measures 30-3/4" by 39')

PartSelect Number PS11743835

This white fresh food door gasket measures approximately 30-3/4 inches by 39 inches. It is used on many fresh food doors of top mount model refrigerators that have been manufactured since 1980.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door Sweating.

Compare At

$128.40

You Save

$21.40

Your Price

$107.00
Order within the next 9 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 4 reviews What's this?
1-4 of 4
 

13 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Socket set
Customer: Joel from Upper Arlington, OH

Failure to seal fridge doors adequately.

The doors had many hex screws. Using the correct socket size was critical. Empty the door shelves first. The screws had to come out because the new seal had slot holes for them to go between. Take off half of the screws from the top and sides and partially remove the old seal. Attach the new seal and do the same with the bottom half. With the new seal on the lower door it at first looks like a poor seal. Gently press the door and hold it for about 5 min. Then the seal is ok. The door can then can be open and shut gently with a good seal. With a good set of sockets the work can go faster than the time given.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 5 people found this instruction helpful

Parts Used:
  • Food Door Gasket (measures 30-3/4" by 39')
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Pliers, Screw drivers
Customer: Nancy from Malden, MA

Needed to replace gasket/seal on fridge

Most importantly make sure you get the wrinkles out of the gasket, a step we did not follow exactly, so we ended up having to work the seal a lot more to make it fit properly which of course made the repair take longer than needed. Other than that no problems here

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Kenneth from Marble Falls, TX

Door sagging (bushings gone), seal bad

r#1 removed upper hinge bracket, removed icebox door, unscrewed middle hinge bracket, removed main door, extracted broken plastic bushings, pushed in new bushings, reversed process while adjusting doors. works fine now.

#2 compared door seal with new one from partselect. Turned out that new seal is not magnetic. Had to return. Door still has bad seal.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
  • Food Door Gasket (measures 30-3/4" by 39')
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: Thomas from Mobile, AL

Gasket wouldn't seal all the way around

Due to some deformity of the gasket, it didn't seal all the way around. The instructions suggested using a heat light to warm the gasket with the door open. That didn't work too well so I closed the door and used a heat gun lightly in the areas it didn't seal. That worked great to soften the gasket so the magnet in the gasket could pull it gasket tight to the refrigerator. I let it cool with the door closed and it now seals perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4