Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/42954.gif
See part 3 in the diagram
http://www.partselect.com/Schematics/Maytag/42954.gif

Freezer Door Gasket

PartSelect Number PS11743826

This white door gasket is used to seal the freezer door when closed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$116.24

You Save

$19.37

Your Price

$96.87
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 1.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

8 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Pliers
Customer: Tom C. from Georgetown, KY

The new gaskets had crips in it and the screws in the corners was a pain to get started

I took each door off and put a towel over the fridge and freezer to help keep it cool while I was working on it And soaked the new gaskets in hot water to limber them up And was glad when I completed the task

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Freezer Door Gasket
Level of Difficulty: Very Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: Carol from Fremont, IN

Freezer door leaked

Ordering from your company was great and you shipped the same day. I did call a professional to installed the rubber seal. The charge was $75.00 but it was worth it to have the job done correctly. We tried ourselves origionally, but the seal leaked worse than ever.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Darl L. from Grass Lake, MI

These gaskets are not fit to insall,they would not seal

i used a hair dryer and nut driver

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3