Quick Question!

Have you ever purchased from PartSelect.com before?

11743765-1-S-Whirlpool-WP691366-Idler Pulley Assembly
11743765-1-S-Whirlpool-WP691366-Idler Pulley Assembly 11743765-2-S-Whirlpool-WP691366-Idler Pulley Assembly 11743765-3-S-Whirlpool-WP691366-Idler Pulley Assembly http://www.partselect.com/Schematics/Whirlpool/DHKQOZSM.gif

Idler Pulley Assembly

PartSelect Number PS11743765

This part provides the tension required for a multi-ribbed belt. It also serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not tumble.
  • Noisy.
  • Will Not Start.
  • Takes too long to dry.

Compare At

$12.05

You Save

$2.01

Your Price

$10.04
Order within the next 12 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 57 reviews What's this?
 

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: STEVE A from BAYTOWN, TX

Drum support rollers seized and not turning.

Removed the two screws to the lint screen. Popped open the top panel and swung up to open.
Removed the two socket head screws holding on the front panel and then lifted up and out to remove the panel.
Disconnected the drum belt from the bottom tensioner pulley and then removed the drum.
I then replaced the two drum support rollers and the belt tensioner pulley. I put the new belt around the drum and reinstalled the drum. From the bottom, I threaded the new belt around the new tensioner pulley.
I then reinstalled the front panel and top panel in the reverse of disassembly.
All went well.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 9 people found this instruction helpful

Parts Used:
  • Idler Pulley Assembly
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: John from Stanwood, WA

Dryer belt broke and bent idler pulley assembly

I started by removing the back of the dryer thinking that was the proper procedure. That is where I found the broken belt. After purchasing the belt I found belt replacement instructions on-line. The instructions guide you through simple steps to remove the two screws in the area where the lint filter is on top of the dryer. The top then simply lifts back exposing the drum. Two more screws just inside the top of the front panel and two screws to remove the door switch assembly and your in. That is where I found the bent idler pulley assembly that pops free when the belt breaks. I purchased the part and followed the directions and then re-assembled the dryer. Dryer works like new. The most important thing I learned through this is that I believe I can now fix anything that breaks on my dryer. With the all the information that is available on-line and the easy access to replacement parts dryer repair is really cheap and simple. Makes me wish I had done some troubleshooting on my previous dryer before I replaced it. Also going through the back of the dryer was a waste of time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Tony from Baltimore, MD

Broken belt

I removed the front cover and then the dryer drum.
I replaced the idler pulley then fed the new belt to the motor pulley.The repair was simple and took about fifteen minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Kenneth from Baltimore, MD

The tub did not rotate.

I'm a retired industrial machine mechanic of 40+ years. I found you instructions very good. I can not kneel. So I tilted the unit Back to rest on the deep sink. This was a good position to clean and replace the parts I ordered from your company. Witch were a perfict fit. My unit has a bottom hinged door. That's what I used the 2" C clamp for. To keep the door from slamming shut. Thank you for all your support. It was outstanding.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: MARK from FRUITLAND PARK, FL

Replacing dryer belt and idler assembly.

The original idler assembly was an inferior part. Instead of a wheel, it simply had a nylon strip attached to the arm. The belt rode against the strip and eventually wore it out. When the belt began running against the metal, it would not longer move causing the motor to eventually destroy the belt. Access to the idler assembly and belt is from the front of the machine. First remove the two small screws from under the door to the lint filter. Lift the top of the machine and tilt back. You have to move the top slightly forward from the base in order to lift it. Unplug the door switch. Remove the two screws (one on each side) that hold the front of the machine to it's sides. Lift up slightly on the front of the machine to disconnect it from the bottom. Move the front of the machine out of the way. The drum will drop down, but will not fall out. The idler is underneath the drum. It is not held by screws. It is simply a curved spring with the idler wheel attached. Bend it down to loosen the belt. Remove the belt from the idler and the idler from the base making note of how the belt runs through the idler. Replace the belt making sure the grooved side of the belt runs against the drum. Install the idler into the slots in the base of the machine. Fit the drum back into the back of the machine making sure the gasket does not get folded. Install the belt through the idler by bending the idler down to relieve the tension on the belt. If the idler and belt are properly installed, when you release the idler it will put tension on the belt. Re-install the front and top. Make sure you plug in the door switch before attaching the top. Warning: there is a lot of sharp metal inside a dryer. Be careful working around it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Customer: Ray from San Augustine, TX

Idle pulley and belt broke

took back ,front, and top off put belt and pulley on and replaced front the top then back and it is still working great

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Idler Pulley Assembly
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: brad from fruithurst, AL

Broken belt and idler pulley

real simple,remove the two screws that holds the lent trap,then use a flat head screw driver to pop the front of the top up.then remove the two screws that holds the front to the sides,now lay the dryer on its back and remove the front and set it aside.now carefully pull the tub straight up and set aside.the idler pulley has probably fallen off its track,but know worries,it will go back once you have installed new belt.clean all of the lent that has been stuck around everything over the years.put the tub back in place,making sure that it ligns up correct.now put the new belt back making sure that it ligns up with the old marks.place the idler pulley back in place and turn the tub counter clocwwise to make sure it is aligned.put front back in place and snap the top on and reinstall the two screws in lent trap.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Richard from Bellevue, OH

Idler pulley sized, melted, and broke belt

Fantastic website! After scratching my head, trying to figure out how to access the inside of the dryer unit, I did a Google search and found partselect.com. Watched the installation video, disassembled the dryer according to instructions. Located bad components (Idler pulley and belt). Placed an order on partselect.com and received repair components in only 3 working days. Reassembly with new components was a snap. I highly recommend PartSelect. Great website and service! A+++

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set
Customer: Linda from Mentone, CA

Drum wouldn't turn

Took the front of dryer off and saw that the idler pulley bar had broken(the metal part that attached to bottom of dryer) so we ordered it and a new belt since it looked like it would break anyday. The parts came in 2 days and we replaced both items without a problem. It works like a charm again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Idler Pulley Assembly
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Russell from Eustis, FL

Belt broke, discovered after dryer ceased to spin

I have to tell you the partselect.com video describing the replacement of a belt was the best I have ever seen. I chose to replace the idler pulley as well after receipt of the ordered belt and this was a good decision. The net of it was watching the video a couple times in advance of the effort was all the training required. I followed the video steps, found the old pulley, threw it away, ordered the new idler pulley, taped the new belt onto the drum, inserted the pulley, wrapped the belt past the pulley and onto the motor as instructed and applauded the ease of this effort.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Bruce from Somersworth, NH

Drive belt cracked, idler pulley noisy.

!. Unplug dryer.
2. Lift out lint tray and remove two screws that attach the lint tube to the dryer top.
3. Using a large screwdriver, lift up the front of the dryer top at each front corner. There is a snap lock at each corner. Note: Prop or tie up the dryer top so you can work in the dryer.
4. Remove the (2) 5/16" screws that secure the front of the dryer to the sides. Remove the (2) wires to the door switch. Tilt out the front section and lift up to remove. Note: the front section holds up the front of the drum and the drum will drop a bit.
5. Underneath the drum on the right side, release (lift up) the idler wheel and remove belt from the motor pulley. Slide the belt forward off the drum.
6. I found it easier to remove the drum and remove the idler wheel. The idler pulley sits in two groves in the dryer floor.
7. Install the new idler pulley in the slots on the floor. Install the new belt on the drum with the belt grooves against the drum. Make sure the belt is fairly straight on the drum and in the same place as the old one.
8.Lift drum back into dryer making sure it sits on the (2) rear support wheels and the rear seal isn't tucked back into the drum. I found it very helpfull to support the front of the drum with a block of wood or books for the next step.
9. Under the dryer drum, take the belt and wrap it under the idler pulley and around onto the motor pulley while lifting up on the idler pulley. Make sure the belt isn't twisted and the belt grooves are against the motor pulley.
10. With the front section tilted out at the top, lower it into the (2) tabs in the side sections. CAREFULLY tilt the front in making sure the front section goes into the drum without binding the felt gasket.
11. Reattach the two wires and 5/16" screws to the sides. Spin the drum by hand to make sure the belt is straight and the front and rear drum seals aren't binding.
12. lower the top down and snap onto dryer. Install (2) screws into dryer lint tube and plug back in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: Kevin from High Point, NC

Broken belt & idler pulley

Replaced the drum belt and idler puley with new parts. Most of the time was spent cleaning up lint and shreded pieces of broken belt and pulley. Replacing the parts was less than an hour.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers, Socket set
Customer: Robert from Bremen, IN

Dryer was blowing or triping internal thermal motor protector..shaft would not turn easily when all was removed. (belt and drum )

Unplug. Dissembled the dryer. Front off ,back off ,all covers off. drum removed . Belt and idler pulley set aside. Vacuum everything clean! Motor shaft turned very hard. OILED both end with a 5w30 motor oil, few drop. Spins much easier .. Put back together..
ORDERED PARTS.. Motor needed , rest were PREVENTIVE.. (this is my 3rd Whirlpool dryer in 37 years of marriage)..Have yet to actually change motor --but a humming growl is starting from the motor again. Will change it this weekend, + new belt and pulley , saving the old (belt & pulley) just in case.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Bradley from Smithfield, RI

Loud noise when the dryer would start up.

I opened the top of the dryer, removed the door and held up the dryer drum. I placed the new belt over the drum and placed the pulley assembly on.
I then bolted the front door back on and placed the top back down.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Wrench set
Customer: Markus from Forest Park, IL

Broken belt

I brought in a broken belt to a local parts store to replace it. They gave me one that was too large. When I returned the belt for a larger one, the clerk measured it against the one I returned, determined that is was shorter, but mistakenly gave me the same belt back. I couldn't go back a third time so I ordered online with Partselect. The part was much cheaper and arrived the next day. I put the belt on in minutes. Your products are great and your service is quick.

Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?