Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743654
This is the bucket only. It holds the ice, until needed, once the ice is released from the icemaker.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
First, I removed the ice bucket and crusher assembly and emptied the ice into a tupperware container.Next, I removed the face plate by carefully pressing the bottom of the ice bucket and releasing the tabs on the face plate.Using a 1/4" nutdriver, I removed the two screws near the bottom of the ice crusher and auger assembly which holds it to the ice bucket.As long as the auger was off, I decided to replace the end cap to see if that would solve the jamming problem. It takes a little finesse to figure out how to twist the cap so it can be removed, but it is fairly easy once you see how it works. Reassembly is the reverse procedure. When putting the face plate back on, be sure the lip at the top (just below the clear window) laps over the top of the bucket.
Help other customers find the most helpful instructions.
Were these instructions helpful?
First I removed the old ice bucket. It just slides right out. Then I removed two screw located right in front. After that all the parts come right off. Switch all the part from the old Ice Bucket to the new one. Reinserted the Ice Bucket and works like new.
removed the old one and installed the new one.
First I removed the ice bucket from freezer removed 2 screws from the front that hold ice auger in place. Slid ice bucket out replaced new bucket replaced 2 screws returned to freezer.
!st I called a repair man because the fridge is under warranty. They came out and this part was not under the warranty. I started looking online and found PartSelect.com. They broke down the icemaker into parts and I could see that I did not need the whole icemaker, just the bucket and a cap. I could not believe how simple the problem was. Took just minutes to fix and now I can get ice from my door again! I got the parts quick and I got what I ordered. I highly recommend PartsSelect.com!
removed ice bin and removed ice maker, thawed water tube. installed new ice maker (reason water tube was freezing over) and installed new ice bin because the old one was cracked, and the reason the ice rotor often hung up.
replace ice bucket and end cap, ice bucket was cracked along edges, auger kept jamming. Replaced parts and is working great, easy to repair.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.