Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743653
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I had to pull the old ice bucket out, remove the front cover and the ice churner from the old bucket. The churner had to be installed onto the new ice bucket, then the front cover had to be snapped back on to the front of the ice bucket. Finally, the new bucket was slid into place. The whole process was relatively easy for a non-mechanical person like me, with the help of detailed instructions that came with the unit. The on-line video was also helpful. I would recommend this company to friends.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Received a repair quote for 234 dollars from a vendor recommended by Jenn-Air. By ordering through partsselect, I paid approximately 35 dollars for the parts, including shipping charges. The repair instructions were simple to follow and it took me about 30 minutes to replace both parts.
dismanteled ice bucket end and removed auger slid helix off and reinstalled auger in bucket. real good instructions.
Super fast , I received my parts the very next day ,THANKS to PartSelect.com. GREAT JOB . Pulled out 4 screws , pulled out the ice turn gear & crusher , replaced the helix end cap , put all these parts back in place , screwed 4 screws back in ice bucket , back in freezer and it works like new . It would of cost me $110.00 to have a repair company do this simple job .
With a socket set wrench this is the second time it happen no problem
viewed online video, followed steps, my amana had 3 screws instead of 1 screw. with plastic clips. removed l bracket screw, backed off other 2 screws, did not remove. slid ice maker up off 2 screws unplugged wire harness, followed the rest of steps on video. reversed steps for installation. one note, pay attention to how the wire harness is clocked it makes install easier because of access.
Removed ice bucket, removed front of old ice bucker, removed ice auger, steralized new bucket and replaced all parts. Slid new bucket in refrig.
Removed all parts in ice bucket and replaced end cap and bucket.It was very easy and is working great. Thanks for your help
removed ice bin from the fridge. snaped off the front plate. Removed 4 screws. this led to freeing up the auger. removed it and put the auger into the new bin and replace the front parts. Put storage bin back into fridge. Done. Might want to keep some ice cubes in a separte container until done. Not hard.
removed old parts. took ice crusher and auger out with socket set. replaced old bin with new and re-installed ice crusher. with meat pan removed roller wheels from old part and re-installed on new pan using pliers.
replaced ice maker and ice bucket with really no problems while watching repair video. had ice making within hours and is working wonderful.
i had a serviceman look at it and he said it needed 6 parts, so i went to parts select and found the parts that i needed and i only needed 2 parts, the icemaker auger assembly and the ice bucket. It is working just like new again!!! thank you parts select, order on one day and recieved it the next day now thats what i call very fast service and shipping. If i should ever need parts for anything else parts select is the place i will go to. thank you again carol quincy il
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.