Quick Question!

Have you ever purchased from PartSelect.com before?

11743579-1-S-Whirlpool-WP67004151-Facade Insert - Black
11743579-1-S-Whirlpool-WP67004151-Facade Insert - Black http://www.partselect.com/Schematics/Maytag/57859.gif

Facade Insert - Black

PartSelect Number PS11743579

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not dispensing water.

Compare At

$33.37

You Save

$5.56

Your Price

$27.81
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 4 reviews What's this?
1-4 of 4
 

22 of 31 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers
Customer: David from Pensacola, FL

The "ice dispense" button broke.

Unplugged refrigerator; removed two screws with a nut driver; removed front panel; removed circuit board; disconnected two electric connectors.
Reversed process to install new panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 21 people found this instruction helpful

Parts Used:
  • Facade Insert - Black
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: David from Pensacola, FL

The facade plate had worn places due to age & use

The facade plate is attached to the ice/water dispenser panel with an adhesive. I used a hair dryer to warm and soften the adhesive. Peeled off the old facade and attached the new facade. Never even had to unplug the old. Fun project!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 15 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: David from Pensacola, FL

Dispenser buttons for water and ice wouldn't cycle

1.Unplug refrigerator and remove dispenser cup floor plate. 2.Remove two hex head screws.
3.Remove electronics board phillips head screw.
4.disconnect actuator switch from dispenser.
5.Remove electronics board.
6.Reverse the order on the new Facade and attach Facade insert-black

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
  • Facade Insert - Black
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: David from Pensacola, FL

The low voltage transformer to under the counter lighting failed.

The first step in making any repair is finding the right replacement part. It took me about 5 minutes in the internet to locate the correct part at PartSelect. Another 5 minutes to order the correct part and receive a confirming email. Replacement installation of the defective part was 5 minutes to install the new part and verify that the problem was solved. The under-the-counter lighting worked once again which made my wife happy, which as you know make everybody's life better.
Thanks for the fast shipping.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4