Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743502
NOTE: As per the manufacture the crisper drawer has been updated from the original. A new crisper cover may need to be purchased for the drawers to work.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Crisper drawers:1. Removed crisper drawers from refrigerator.2. Removed drawer front decoration panels.3. Unpacked, inspected and rinsed out new drawers.4. Attached drawer front decoration panels.5. Transfered vegetables and fruit from old drawers to new drawers.6. Installed new drawers in refrigerator.7. Closed refrigerator door.8. Total time about 15 minutes, no tools required.Ice & Water filter1. Opened filter compartment cover2. Removed old filter, drained into sink and placed in the trash.3. Installed new filter4. Bled the water line with ice water tap button (be aware when the air in the line exits the spigot, it create a lot of spray and you may need to cleanup the water that splash out of the bottom of the container used to capture the water during the bleeding process.)5. Close the filter cover and refrigerator door.6. Total time about 10 minutes and no tools required.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Since the crisper didn't come with a front, the old front needed to be removed from the broken cripser and attached to the new one. The easiest way to take off the front is to remove it from the bottom of the crisper. Once the pressure is released it comes off easy. Snap the front on the new crisper by starting with the top and snapping the bottom.
I ordered a new crisper drawer from PartSelect over the internet one morning at approximately 10:00am, and the product was delivered, non-express delivery, the next day at about 4:pm. The front coverplate of the old crisper came off easily, and snapped into place on the new drawer easily. The entire repair/replacement took less than 5 minutes. Service from PartSelect, from locating, to ordering, to rceiving the part could not have been simpler or more efficient. A 5 star experience.Thank you.
The front had to be removed from old drawer a put on new one
Ordered new drawer -- fast and easy to find the correct part on this site. I also felt that the price was very reasonable.Except for one thing, it would have been simple to slide the new drawer in.The original drawer has a white plastic "face" that is removable."Removable" is a relative term. It took my wife and I over 20 mins to very carefully remove the face without breaking. One person could not do it --- you need to hold the drawer firmly while another pries the face off carefully. Once off, it was able to be pushed on to the new drawer -- be firm.
I simply replaced the shelves and drawers
needless to say, I am rather rough on my refrigerator, I managed to break the pantry drawer lid and the crisper drawer when cleaning it. I dropped them. Anyhow, We were pleased the order came so quickly, that we replaced it immediately, just a little pressure on the front to remove it and place it on my new crisper. it was a piece of cake! Thankfully, they fit perfect. There is nothing worse than opening your refrigerator and seeing broken things inside. It looks brand New again!!
Thanks to others who shared their story, I was prepared to "muscle" the front cover off the old crisper and snap it into place on the new crisper -- warning if you are good with puzzles and mechanics, this repair is a "snap"; Pantry Lid is very easy, push pin on left side, slide old lid out and push new lid in.
Replaced two original crisper drawers with 2 new drawers; replaced broken end cap which required the removal of a few bolts and screws. The replacement parts were identical matches--a huge relief. The interior of the fridge looks like new. This follows upon not being able to get the parts directly from the manufacturer.
The crisper only required me to remove the trim from the broken crisper and replace it on the new. The hinge on the deli cooler lid was more complicated. I had to take all the bottom drawers and shelves out, and then, using a socket set, remove several screws that held the old unit in. Then, perhaps most complicated of all, I had to figure out how to remove the temperature setting from the broken piece and replace it on the new piece. Once that was done, it was just a matter of screwing the piece back to the side of the fridge.
Remove crisper and take off white front piece from old crisper and add to new one. Replace in refrigerator.
This has nothing to do with the repair - But with the customer service. I ordered and received a crisper in the mail and it had a crack in it. When I called the customer service # they helped me quickly and explained exactly how the credit/re-ship would happen. I received my new crisper in just a couple of days. Thank you!
I simply replaced the drawer with my existing front. I received my order almost next day. I was surprised on their speed, loved it!!
No probelm what so ever. Take off from bottom first. Took less than 5 minutes for two. Plastic runners should have been stronger as it seems others have the same probelm. Parts ordered on Friday, deivered on Wednesday.
I have to say this was the smoothest repair ever! It was easy to find on the site, ordering was easy, part came, snapped off, snapped on new drawer, FINISHED! Thank you!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.