Quick Question!

Have you ever purchased from PartSelect.com before?

11743498-1-S-Whirlpool-WP67002527-Overload Relay
11743498-1-S-Whirlpool-WP67002527-Overload Relay 11743498-2-S-Whirlpool-WP67002527-Overload Relay 11743498-3-S-Whirlpool-WP67002527-Overload Relay http://www.partselect.com/Schematics/Maytag/54808.gif

Overload Relay

PartSelect Number PS11743498

A device that protects a motor from overheating due to an overload condition in the machinery.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.

Compare At

$62.24

You Save

$10.37

Your Price

$51.87
Order within the next 1 hr and 58 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

19 of 20 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: keith from sarasota, FL

Compressor not cycling on/compressor not pumping refrigerant

Using a nut driver I removed the lower back panel to gain access to the compressor.Removed a clip that held Run Capacitor and Overload Relay in place on the compressor.I removed the capacitor first then pulled the relay off from the compressor.Then I unplugged the wire harness from the relay.This job is very simple if you have original replacement parts in hand to re-install.PartSelect provided me with the exact replacement parts...
Update: My refrigerator has been running 6 weeks now.Soon after I sent the note above I had a Technician check for refrigerant in the system.There was none!The Technician,who replaced my evaporator-heater in November failed to plug properly the port on the compressor.So,this thing is now running better than before.It now makes ice in the same container at the same setting,in 6 hours instead of 8 hours.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 6 people found this instruction helpful

Parts Used:
  • Overload Relay
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers
Customer: Charles from Knoxville, TN

Quit cooling ,had a click noise when it tryed to turn on compressor

removed the rear panel and replaced the part on the compressor and replugged the wires.Easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Overload Relay
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Gary from Franklin, NE

Refrigerator suddenly quit

I took off the back and unsnaped the old relay and pluged in the new one.The part was recieved really fast.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3