This is a 2-speed drive motor for your washing machine. The motor rotates the spin basket when the washing machine is in spin or tumbling mode. You will likely need to replace the motor if you are experiencing burning smells or your washer will not start. The tools you will need to make this repair include a number two Phillips screwdriver, a flat-blade screwdriver, and a 5/16 nut driver.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer 2-Speed Drive Motor - 60Hz 120V
Troubleshooting
This part fixes the following symptoms:
Burning smell | Will Not Start | Will not agitate | Will not drain
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, Roper, Maytag.
Part# WP661600 replaces these:
AP6010250, 3349643, 3349644, 3349645, 3353177, 3363736, 3363737, 387780, 389248, 389248SKID, 3946897, 3951550, 62535, 62556, 661599, 661600, 661600SKID, 8117, 8528157, 8528158
...
Show more, 8577157, W10210608, WP661599, WP661600VP Show less
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.0
Filter By Rating:
5 Stars
3
4 Stars
2
3 Stars
1
2 Stars
1
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Matthew E - July 17, 2022
Verified Purchase
easy repair, excellent, saved me money
keep up the good work, sure appreciate being able to get parts so can fix our own appliances .
★★★★★
★★★★★
Todd R - May 26, 2021
Verified Purchase
Worked as intended
Motor was packaged nice for shipping. No issues and worked as it was supposed to! Will buy again from parts select!
★★★★★
★★★★★
Jeff C - March 17, 2019
Verified Purchase
better packaging
first motor was damaged and not usable , poor packaging . Was in a poor quality cardboard box and not much styrofoam around motor . It was packed like it was being shipped on a pallet with other motors . Second motor was packed the same but made it with only a very small amount of damage and was usable . You guys need to repack your heavy (15lb) motors so they don't get damaged .
★★★★★
★★★★★
Gregory C - April 25, 2018
Verified Purchase
Delivered promptly as expected, installed easily
The website helped me find the right part right away. It helped my confidence by showing the symptoms each part might have and the percentage reported. There was a video that really helped and I had to refer back to it to figure some things out. I replaced the motor but still was 90% expecting I would also have to order a starter capacitor, but it worked and has been running great ever since.
★★★★★
★★★★★
David B - March 25, 2018
Verified Purchase
No trouble with installation
That wasn't the problem with my washer. I hooked it up and it still doesnt work. I will take it apart again and see what else the pro lem could be. Probably the coupler pn the gear box.
★★★★★
★★★★★
CESAR G - March 20, 2018
Verified Purchase
Bad part
The motor didn't work and it would not spin not even by hand. So I called to return it.
★★★★★
★★★★★
Jose C - January 27, 2018
Verified Purchase
Very easy repair
If capacitor is replaced with motor, make sure to plug it in the correct way. You will know if you did it incorrectly. The cap will start to smell. If there's no smell then you've plugged it in the right way.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer would not spin clothes
Followed the video instructions. Had no problems. The video was accurate.
Washer would not drain after wash cycle. Would start to try but stop dead.
Repair went well and relatively easy, but did not fix the problem. Suspect timer switch was the culprit. Nothing was clogged or plugged up. Water pump and impeller were free and clear with no damage or leaks.
James F. from WILMOT, NH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer tub would not spin or agitate and made a high pitch spinning noise during those cycles.
Basically I followed the great instructions provided on the Part Select webpages. I would consider myself to have more common sense than mechanical skill. I didn't want to have to keep going back to purchase more parts so I decided to buy the motor coupler (under $5), new clutch assembly (Under $30), new motor (under $160). The shaft o
... Read moren the original motor wore down to a cylindrical shape which should have been more of a rectangular shape to fit precisely into the motor coupler and provide the grip strength for the washer tub to spin. Usually the no spin problem is linked to a faulty motor coupler. I was glad that I had to removed the motor to reach the motor coupler because in my case the coupler had not failed. That is when I saw the motor shaft had worn. Since I had all the new parts I replaced them all and since 6/13/19 the washer is running like new. Oh, the problem was most likely caused by someone in my family "overloading" the wash machine one too many times over 11 years. Guy's / Gal's you can do this and save yourself from buying a new washer for between $850 - $1,200. My repair expense was under $240 including tax and next day delivery of my parts. Thanks Part Select !!!! Neil
1. Watch a video on installation, there are many on the internet. (unplug the washer) 2. remove the screws on the back of the control panel to lift the control panel out of the way. 3. use a flat head screwdriver to remove the clips that hold the cabinet to the back panel. 4. disconnect the lid switch from the control
... Read morepanel by removing the clip that connects them at the top of the cabinet. 5. tilt the cabinet forward to remove it. 6. use a flat head screw driver to remove the two clips that hold the water pump to the motor and swing the water pump out of the way. 7. use a nut driver to remove the shipping screw that holds the clips on to the motor. 8. disconnect the wiring harness from the motor 9. remove the two clips from the motor with a flat head screwdriver and remove the motor remove the three prong coupler and rubber gasket from the old motor and put them on the shaft of the new motor 10. remove the 4 rubber pads from the old motor and slide them onto the new motor. 11. insert the new motor into the washer aligning the prongs of the coupler. 12 reassemble the washer in reverse order of disassembly (the shipping screw does not need to be reinserted into the spring clip that holds the motor)
Read less
Joseph from SANFORD, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken pump and burned out motor
The repair itself was very simply, probably largely due to the design of the machine which made getting to, and replacing the two faulty parts a cinch. Just unscrew the two screws on the motor brackets which hold the motor down, and remove the brackets. Then remove the two smaller brackets which hold the pump to the motor. Then remove the
... Read more two clamps and hoses from the pump. Lastly disconnect the power supply from the motor and the pump and motor will then come out as one unit. Simply reverse the process when reinstalling the new pump and motor. I used a bit of oil to lubricate the new motor shaft but I am sure it probably isn't necessary. The job should take no more than half an hour tops.
First unplug the electrical chord and disconnect the water supply after you have turned it off. Drain all water you can by putting the drain hose into a bucket or water container lower then the drain hose. Remove the two screws at base of the front panel. Then go to the back side of the machine remove the two screws at the top of the bac
... Read morek panel, this allow you to remove the top switch panel. Remove the two screws at the bottom outside corners of the back panel and then you can lift the panel up and away from the base. I leaned the back against my dryer because I did not have a helper. Go to the front of the machine, lift the lid and grasp with one hand the machine's sheet metal lift and pull it off the base. There are two metal clips attaching the pump to the motor. The pump slides off and I did not have to remove the hoses. Unclip the electrical connectors from the motor and capacitor. The motor is mounted with two clips with a screw secure it in place. Unscrew and unclip and the motor should slide out. Be sure to inspect the direct drive coupler, the parts not too expensive. I had replaced mine just 4 months ago so I was good to go. Reverse the procedure and you should be in business.
Read less
Paul from Lakewood, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
43 of 48 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer had water leak in lower front and would not drain.
Laid the washer on its back and found leak in water pump. Found out it was caused by vibration from motor with bad bearing. Removed pump and motor which were held on by clips. Both were removed and replaced without removing cabinet from machine.
Ask our experts a question about this part and we'll get back to you as soon as possible!
24 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wynema
November 29, 2017
My washer still will not agitate, it will spin and drain the water. I have changed the whole agitator kit, the washer drive block and also the motor coupling. Any ideas of what it might be?
For model number RTW4440VQ2
Hello Wynema,
Thanks for your question. We would recommend examining the lower agitator base and the upper agitator for signs of any damage. If those are intact, it could be the drive motor itself causing the issue. Make sure it is getting power. If the motor hums but does not run, or if it does not turn freely, replace it.
I hope this helps.
I smell a burning smell while the washer is in operation. I found the motor is over heating but all other parts seem to be turning freely. I'm concerned because i cant find an indicative reason for the motor overheating. A 175$ motor is half of what i paid for the whole washer only 4 years ago. If it is the transmission that's bad replacing both exceeds the cost of a new one. Suggestions?
For model number Kenmoore 400 top loading washer
Hi James,
Thank you for your question. In most washers, the main drive motor is used to operate the mechanical functions of the wash cycles such as agitation or tumble and spin. It may also be used to operate the drain pump. When a defect or problem occurs in one of the motor driven components it may cause the drive motor to overheat and create a burning smell. If the problem is severe, it may also overheat the motor enough to cause it to fail. A common symptom associated with a failing drive motor is a humming or buzzing noise when the motor is starting. If you are experiencing an electrical burning smell that appears to come from the motor you should first check for any mechanical failures that may be causing the motor to overheat. Check for restrictions to the pump, the transmission and the spin basket, that may put a strain on the drive motor. If the drive motor is unable to turn freely on its own, it is probably defective and will need to be replaced. If your model of washer has a motor capacitor, it may be at fault and can also cause the motor to overheat. Disconnect power to the appliance before attempting any repair. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
April 29, 2019
When the washer is put into wash or spin cycles there is a hum noise and nothing happens; the washer will not agitate nor spin. No burning smell. I see no capacitor. Is it most likely that the motor needs replacement? Is there a capacitor that needs checking and how do that? Thanks for your help.
For model number MWVC300VW1 Maytag washer
Hello Larry, Thank you for the question. There is a Motor Capacitor, PartSelect Number PS11746660. You can test the Capacitor with a multi meter to determine if it is defective. Hope this helps1
3 people found this helpful.
Was this helpful?
Thank you for voting!
Timothy
November 12, 2018
Hello,
Two weeks ago we went to start laundry and the washer wouldn't start. last week i changed the coupler and clutch in my washing machine and it's still having problems. it'll start but before it gets to spin, it starts to make a funny sound like it's getting stuck and then it'll cut off and won't come back on. i tried to reinstall the parts again just in case i didn't have them on right but i did. so it doesn't even get to spin and the washer is filled with water and it won't drain. do you know what it could be?
For model number Estate TAWB600PQ1
Hello Timothy, Thank you for the question. I suggest checking the Gear and Pinion Kit, PartSelect Number PS334496 for wear or damage. Some customers have also replaced the Drive Block, PartSelect Number PS11741977 with this issue. Both will show physical damage or wear if needed to be replaced. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Yesenia
February 20, 2019
Our washer stopped right before the rinse cycle and turned off. We replaced the timer, checked the lid switch and it still doesn't work. Now it only fills with water, but then it makes a humming noise and then clicks and turns off. What can it be? Doesn't even start anymore. It won't move thru the cycle.
For model number LBR4132PQ0
Hello Yesenia, Thank you for contacting us. I suggest checking the following parts: PS1485646 Direct Drive Motor Coupling, PS11741239 Direct Drive Water Pump, and PS11743427 2-Speed Drive Motor - 60Hz 120V. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ladonna
August 7, 2019
Shaft on drive motor (removed)hard to turn. Filled laundry room with smoke. Advice on determining if it (drive motor) needs replacement. Washer didn't quit but base a loud clicking noise.
For model number RTW4440VQ2
Hello LaDonna, thank you for inquiring. It does sound like this Drive Motor part number PS11743427 for your model needs to be replaced based on what you described. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Josh
August 29, 2019
I have a Whirlpool ultimate care 2. When it gets to the spin cycle it will start to spin then it stops but keeps trying. If i let it set for a few minutes then try again it does the same thing. I don't know if it's the motor or what. I hear a hum and it try's to turn. There is also a faint burning smell. Any ideas on what the problem could be? Thanks for any advice.
For model number LSQ8243HQ0
Hello Josh, thank you for inquiring. You will want to consider either the Direct Drive Motor Coupling, part number PS1485646, or the Clutch Assembly, part number PS334641 for your model as the cause of this. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sheila
September 12, 2019
Amana washer machine spins during wash cycle but as soon as rinse comes it wont spin out the water, it just drains this. Any ideas what it could be?
For model number NTW4500VQ1
Good Day Sheila. Thank you for your question in regards to your unit (Model Number NTW4500VQ1). Based on our research you may need to replace your Direct Drive Motor Coupling (PartSelect Number PS1485646). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dale
December 14, 2019
Washer will not go into high spin and clothes are wet.
For model number Kenmore front washing machine
Hello Dale and thanks for writing.
We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. We do carry related parts for units just like yours. For example, part number PS1485646 Good luck with your repair.
The washer goes through all the cycles but when it finishes my clothes come out dripping wet. All the water drains from the machine but leaves quite a bit in my clothes. The heavier the item the more water left in that item of clothing.
For model number 11088732793
Hello, Thank you for your question. If your washer will not spin out all water and clothes are still wet, the drain pump might be clogged with debris or possibly faulty. There could be a foreign object that is stuck in the pump and inside the drain hose. Test to be sure the drain pump is working properly. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
