AP6010228, 6610309, 6610309R, 6610312, 6610312R, 6610383, 6610397, 6610406, 6610452, 6610452R, 6610457, 8522473, 8522476, 8522488, 8522491, 8524277, 8524292, 8524303, 8524318, 8524327
...
Show more, 9755982, 9760299, 9760304, 9761115, 9761120 Show less
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broiler would not shut off--had to unplug the stove
Just connected the part---very simple to fix
LOIS from ALTA VISTA, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patti
November 9, 2018
The top burners work but my oven will not work-is this the part i need for the oven?
For model number RF364PXPQ2
Hi Patti,
Thank you for your question. If the oven is not heating correctly or not working, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If this checks out okay, then you will need to check the electronic control board, the terminal block, the bake element, the safety thermostat and the light socket. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
ELMA
November 28, 2018
When I turn on oven the control panel starts humming. Oven works And heat up but control panel is humming ?
For model number RF370LXPQ0
Hello Elma, Thank you for the question. This sounds like a defective Electronic Control and it will need to be replaced. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Lawrence
October 11, 2022
would this be the part I need? I was preheating the oven we heard a pop and everything on the stove shut off. When the circuit was turned back on sparks flew out of the circuit area.
For model number RF368xpq1
Hi Lawrence, thank you for reaching out. You will need to inspect the oven inside, to see if there are damaged or burned-out parts and wires. You will need to check both the bake and broil elements and look for any burn-outs or damages. If you don't see any physical damage, you will need to do a continuity test using a multimeter. If both the elements are in good shape and have continuity, then the issue is with the oven control board. We hope this information is useful!
