Quick Question!

Have you ever purchased from PartSelect.com before?

11743367-1-S-Whirlpool-WP660533-Surface Burner - 8" - 2600W
11743367-1-S-Whirlpool-WP660533-Surface Burner - 8" - 2600W 11743367-2-S-Whirlpool-WP660533-Surface Burner - 8" - 2600W 11743367-3-S-Whirlpool-WP660533-Surface Burner - 8" - 2600W http://www.partselect.com/Schematics/Maytag/7689.gif

Surface Burner - 8" - 2600W

PartSelect Number PS11743367

The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replace the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.

This part works with the following brands: Whirlpool, Roper, KitchenAid, Maytag, Amana, Kenmore, Estate, Caloric.

This part works with the following products: Range, Cooktop, Microwave Oven Combo, Dryer.

This part fixes the following symptoms:

  • Element will not heat.

Compare At

$25.93

You Save

$4.32

Your Price

$21.61
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 37 reviews What's this?
31-37 of 37
 

1 of 4 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Donna from Carver, MA

Needed to replace one burner

the part arrived in two days. Just had to remove the old one and pop in the new one and it was that easy. I was amazed at how soon the part was delivered and happy to have a working burner again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Scott from Lakewood, OH

Would no longer heat up

Removed the old broken burner and slid the burner prongs into place. Very EASY to replace!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Janet from Uniontown, PA

Burner element was not working right

Since it was a plug-in burner, only needed to pull it out and put the other one in.

Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.
Was very helpful in selecting the part and was very efficient in sending it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2600W
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Bonnie from Highwood, MT

The problem was that the 2 big burners were not working.

I ordered the 2 burners that were not working. When I got the burners, I discovered that one of the burners was still working and the wiring under that on had burned out. So I ordered the little box kit and repaired it. I only needed to strip wires and twist together and replace the small box. Now all are working and I am cooking with all four burners again. All for about $50.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: PATRICK from ANNANDALE, VA

The support bracket on the old heating element broke

Pulled the old one out and slid the new one in (and replaced the drip pans at the same time). Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Louis from Stewartstown, PA

Burners not heating

I removed old parts and cut feed wires. Applied new wire leads, secured with supplied wire nuts, positioned shrink wrap insulators to formed wire connections and shrank with hair drier. Inserted wire lead connectors into the phenolic housings and attached housings to brackets. Closed top and installed new burners. No fuss no muss. All parts fit and stove is ready for another 20 years.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2600W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Robert from Tucson, AZ

Burner replacement

Pug it in! That's it!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31-37 of 37