Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743367
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Removed the old broken burner and slid the burner prongs into place. Very EASY to replace!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Since it was a plug-in burner, only needed to pull it out and put the other one in. Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.Was very helpful in selecting the part and was very efficient in sending it.
I ordered the 2 burners that were not working. When I got the burners, I discovered that one of the burners was still working and the wiring under that on had burned out. So I ordered the little box kit and repaired it. I only needed to strip wires and twist together and replace the small box. Now all are working and I am cooking with all four burners again. All for about $50.
Pulled the old one out and slid the new one in (and replaced the drip pans at the same time). Very easy.
I removed old parts and cut feed wires. Applied new wire leads, secured with supplied wire nuts, positioned shrink wrap insulators to formed wire connections and shrank with hair drier. Inserted wire lead connectors into the phenolic housings and attached housings to brackets. Closed top and installed new burners. No fuss no muss. All parts fit and stove is ready for another 20 years.
Pug it in! That's it!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.