11743367-1-M-Whirlpool-WP660533-Surface Burner - 8 Inch - 2600W
Part Location Diagram of WP660533 Whirlpool Surface Burner - 8 Inch - 2600W
See part 15 in the diagram
11743367-1-S-Whirlpool-WP660533-Surface Burner - 8 Inch - 2600W 360 view
( Grid squares measure 1x1 inch )
11743367-1-S-Whirlpool-WP660533-Surface Burner - 8 Inch - 2600W 11743367-2-S-Whirlpool-WP660533-Surface Burner - 8 Inch - 2600W 11743367-1-S-Whirlpool-WP660533-Surface Burner - 8 Inch - 2600W 360 view
Part Location Diagram of WP660533 Whirlpool Surface Burner - 8 Inch - 2600W
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Surface Burner - 8 Inch - 2600W WP660533

 Fits your DG210!
★★★★★
★★★★★
17 Reviews

Rated by 40 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 36.93
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your DG210!
PartSelect Number PS11743367
Manufacturer Part Number WP660533
Manufactured by Whirlpool
Product Description

Surface Burner - 8 Inch - 2600W Specifications

The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replace the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Microwave Oven Combo, Dryer.
This part works with the following products:
Whirlpool, Maytag, Roper, KitchenAid.
Part# WP660533 replaces these:
AP6010190, 14200721, 14210015, 241419, 241420, 241598, 241743, 244013, 244032, 244063, 244064, 244147, 256702, 256703, 256704, 256705, 256706, 256707, 258898, 263462 , 268105, 301414, 305030-2, 308379, 308380, 309185, 309186, 309214, 309215, 309216, 309340, 312559, 312560, 313963, 313965, 313966, 3195918, 3196205, 4163771, 4164322, 4165352, 4167352, 4167353, 4170120, 4170125, 4179292, 42127, 4315240, 4315583, 4320500, 4322741, 4327929, 4327935, 4328811, 4332689, 4332693, 4332742, 4332859, 4334586, 4334587, 4334588, 4351719, 4352140, 4352631, 4352711, 4353017, 4354325, 4354326, 4354410, 4371354, 4371948, 4372159, 4372608, 4378607, 4389732, 660530, 660531, 660533, 660533BULK, 71853, 74-06-138, 74-06-217, 786185, 816007, 865692, 865696, 866445, 866447, 868449, 868591, 877983, 877984, 878402, 879066, FSP660533, WP660533VP, Y71853 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
17 Reviews
4.9
Filter By Rating:
  • 5 Stars
    16
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David S - September 12, 2023
  Verified Purchase
Perfect Match
The part was identical to the one I was replacing. 15 second repair.
★★★★★
★★★★★
Mary Ellen H - May 3, 2021
  Verified Purchase
Perfect replacement for my 30 year old stove burner.
The burner looks identical to my old one. No body would ever know it was a replacement burner. So easy to install, just pull out the old one and insert the new one.
★★★★★
★★★★★
MONICA M - October 5, 2020
  Verified Purchase
Easy to install, works great
The part was in great condition and shipping was fast.
★★★★★
★★★★★
Stucker D - September 9, 2020
  Verified Purchase
Thank God for Spare Parts Peeps!
Excellent visual description of the stove top parts made it easy to order with confidence. Got here fast. Popped it in. Done!
★★★★★
★★★★★
Kathy M - July 11, 2020
  Verified Purchase
Didn't fit the stove, but worked
The burner would not fit in the tray. It was too long. Luckily my husband was able to grind the support that the burner sits on so it could fit. It works fine though.
★★★★★
★★★★★
Edith G - May 5, 2020
  Verified Purchase
Fits perfect
Stove is quite old and was surprised to find burners that fit. Quite happy with purchase
★★★★★
★★★★★
Sharon C - December 13, 2019
  Verified Purchase
Easy repair, part fit perfectly!
The plug in element fit perfectly and our stove is back in working order. The part was shipped quickly.
★★★★★
★★★★★
David T - May 29, 2019
  Verified Purchase
Great part
I received the correct part within two days and it was an easy repair.
★★★★★
★★★★★
Pamela P - April 20, 2019
  Verified Purchase
Works as expected
The part was correct size and fit.
★★★★★
★★★★★
Steve M - February 25, 2019
  Verified Purchase
Perfect fit, perfect part!
New part and fit perfectly! Thank-you!
  • 1
  • 2
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 40 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
oven bake heater was bad. 8" burner socket went bad from loose connection burner connection got ruined.
two Phillips head screws hold the oven unit in. It culls out and the wires just disconnect. Reinstall in reverse and test.. The burner socket I cut the wires from the old socket and splice the new pigtails onto the existing wires and install the socket. The instructions in the package are good for people that aren't used to doing repairs.
Other Parts Used:
Surface Burner - 8 Inch - 2600W Bake Element - 2600W 240V Surface Burner Plug-In Block Kit
  • Stephen from MIDDLETOWN, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burners were old and did not fit well on the stove
I just had to pull out the old burner and straighten the prongs for the new burner and insert, The prongs of the new burner were slightly bent in shipment, but were easy to straighten with the pliers. The burners were sent in a bag and not a box -- therefore the prongs were easily bent. I was very pleased that I (73 year old lady) was able to fix my stove without a repairman. Saved $$$
Read less
Other Parts Used:
Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • Karen from OLNEY, MD
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The larger burners would stop working while in use.
The removal of the old burner and installation of the new burners was easy. Just lift the opposite side that rests on the rim and pull burner out. New burner then gets inserted and the opposite side goes right into rim. It took all of 30 seconds to replace both burners. I wish I had replaced these when they first started to go!!
  • Lisa from PORT JEFF STA, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
three drip pans arrived with bent edges and dents.
Packing of drip pans was completely inadequate . Had to use a pair of pliers to straighten edges out !
Other Parts Used:
Drip Bowl - 6 Inch Chrome Drip Bowl - 8 inch Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • Sally from HOT SPRINGS, AR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both burners were faulty, neither would come on or heat up.
Simple, just pull out old burners and slide new ones in place. Tried both, they work excellent!
Other Parts Used:
Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • Rex from Keyser, WV
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element did not heat
Pulled out element, plugged in new element. About 5 seconds.
  • Mary from CHARLESTOWN, IN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners were becoming weak. Home Depot and Lowes did not have replacements.
Remove burners using my hands and replace new burners using my hands.
Other Parts Used:
Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • James from EDGEWOOD, MD
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Defective surface burner
Removed all surface burners from range, removed range top screws, and suspended range top. Removed plug-in block mounting screw. Cut wires for plug-in block close to original wire-nut junction. Inserted contacts & wires from kit into plug-in block. Slid a provided shrink sleeve onto each wire. Stripped wires on range wires and then connected them to the plug-in block wires with the provided high-heat wire nuts. Selected one of the two provided plug-in block brackets that matched the original bracket on the range. Used a butane lighter to shrink the shrink sleeves over the wire nut connections. Snapped the appropriate bracket onto the plug-in block. Reassembled everything in reverse order and plugged in new element. Note: my only two issues are that the two high-heat wire nuts provided in the kit were a bit too small for the wire gauge in my Whirlpool range. It took some fiddling on my part by carefully re-stripping the range wires to get the wire nuts twisted on securely. Two more wire nuts of the next size up would have been appreciated. Also, I found that the provided plug-in block mounting screw did not find fit my range. No problem; I simply re-used the original screw. All in all, an easy repair and the element works perfectly.
Read less
Other Parts Used:
Surface Burner - 8 Inch - 2600W Surface Burner Plug-In Block Kit
  • Joseph from RICHMOND, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burners wasn"t getting hot like they should
i just unpluged the old burner and slideed the new burners in place and they work great now like a new range
Other Parts Used:
Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • glenn from ST AUGUSTINE, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner made popping sound and began shooting sparks from one of the rings
extremely easy to replace the burner. I just pulled out the old burner and replaced with new one. The whole process took less than ten minutes.
  • Raul from Oak Hill, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allen
December 11, 2018
I want to order a 8 in. Burner 3350 watt. Yours say 2600watt.Do you have a 3350 watt burner
For model number RCK 986
PartSelect logo
Hello Allen, thank you for your question. Unfortunately, we only have two elements listed for this unit. The large element PartSelect Number: PS11743367, and the small element PartSelect Number: PS11743366. I hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Juli
February 20, 2018
Anytime i try to find a replacement 8-inch element for the above model, it says there isn't such a model. The label and guide book both show rf4700xew7. What part number would fit. The label says it was manufactured in 2002 and is 40 inches wide.
For model number RF4700XEW7
PartSelect logo
Hello Juli, thank you for your question. The Surface Burner for your unit is part number WP660533. This will work with your specific model. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ronna
October 9, 2023
I need a new 8-inch burner for this stove model. I called Whirlpool and they said the part number is 3289. The metal part that connects the two prongs looks slightly different on your website than on theirs, and it looks like yours might not sit flat. Does yours meet factory specs?
For model number Roper FEP310BW0
PartSelect logo
Hello Ronna, thank you for contacting us. The compatible 8-inch surface element for your model is part number PS11743367, and whirlpool originally manufactured it. If you need help placing an order, customer service is open 7 days a week!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Carolyn
December 7, 2022
One of my 8" burners will not reduce to lower temperature stays red hot and burns food.
For model number RF263LXTQ3
PartSelect logo
Hi Carolyn, thank you for reaching out. The problem seems to be with the Surface Element Control Switch and you may need to replace it, the part number is PS11740783. The Surface Element Control Switch turns the surface element on and off and controls how much heat the element produces. If you require assistance placing an order, please contact customer service. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
Surface Burner Element Switch, Large Burner
$95.44

  In Stock
  • 1
Back to Top
You May Also Need ?
Surface Burner Plug-In Block Kit
$13.42
$13.42
  In Stock
Standard Y-Frame Range Surface Burner
$30.15
$30.15
  In Stock
Chrome Drip Bowl - 8 inch
$7.67
$7.67
  In Stock
Drip Bowl - 6 Inch
$6.96
$6.96
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743367
Manufacturer Part Number: WP660533
Brand
Model Number
Description
Roper
2216*20
Range - Electric Range
Roper
2222A00
Range - Roper Range/Stove/Oven Model 2222A00 Parts
Roper
2222A1A
Range - Roper Range/Stove/Oven Model 2222A1A Parts
Roper
2222A2A
Range - Roper Range/Stove/Oven Model 2222A2A Parts
Roper
2222C00
Range - Roper Range/Stove/Oven Model 2222C00 Parts
Roper
2222C1A
Range - Roper Range/Stove/Oven Model 2222C1A Parts
Roper
2222C2A
Range - Roper Range/Stove/Oven Model 2222C2A Parts
Roper
2222H00
Range - Roper Range/Stove/Oven Model 2222H00 Parts
Roper
2222H1A
Range - Roper Range/Stove/Oven Model 2222H1A Parts
Roper
2222H2A
Range - Roper Range/Stove/Oven Model 2222H2A Parts
Roper
2222L00
Range - Roper Range/Stove/Oven Model 2222L00 Parts
Roper
2222L1A
Range - Roper Range/Stove/Oven Model 2222L1A Parts
Roper
2222L2A
Range - Roper Range/Stove/Oven Model 2222L2A Parts
Roper
2222W2A
Range - Roper Range/Stove/Oven Model 2222W2A Parts
Kenmore
22313
Range - Kenmore Range/Stove/Oven Model 22313(1988) Parts
Roper
2242H00
Range - Roper Range/Stove/Oven Model 2242H00 Parts
Roper
2242L00
Range - Roper Range/Stove/Oven Model 2242L00 Parts
Roper
2362X0A
Range - Roper Range/Stove/Oven Model 2362X0A Parts
Roper
2362X1A
Range - Roper Range/Stove/Oven Model 2362X1A Parts
Roper
2362X2A
Range - Roper Range/Stove/Oven Model 2362X2A Parts
Whirlpool
2392A20
Range - Whirlpool Range/Stove/Oven Model 2392A20 Parts
Whirlpool
2392C20
Range - Whirlpool Range/Stove/Oven Model 2392C20 Parts
Whirlpool
2392H20
Range - Whirlpool Range/Stove/Oven Model 2392H20 Parts
Whirlpool
2392W20
Range - Whirlpool Range/Stove/Oven Model 2392W20 Parts
Maytag
258B-2CXW
Range - Maytag Range/Stove/Oven Model 258B-2CXW (258B2CXW, 258B 2CXW) Parts
Maytag
26AA-6CLX
Range - Maytag Range/Stove/Oven Model 26AA-6CLX (26AA6CLX, 26AA 6CLX) Parts
Roper
2848A00
Range - Roper Range/Stove/Oven Model 2848A00 Parts
Roper
2848A10
Range - Roper Range/Stove/Oven Model 2848A10 Parts
Roper
2848C00
Range - Roper Range/Stove/Oven Model 2848C00 Parts
Roper
2848C10
Range - Roper Range/Stove/Oven Model 2848C10 Parts
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Surface Burner - 8 Inch - 2600W
$ 36.93
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.