Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743341
This parts fits on top of the agitator.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Remove top "cap" on agitator to expose the bolt that holds the agitator to the drum shaft. Undo the bolt and pull out the agitator. Disassemble, toss the old parts and install the new parts in reverse order. Repair took less than 5 minutes and we can now do full loads of laundry again!
Help other customers find the most helpful instructions.
Were these instructions helpful?
ordered part on wednesday. it shipped to me thursday. pop the old one off, popped the new one on. slick and easy !!!thanks
removed the cap and unscrewed locking fitting. Removed aggitator dogs and replaced with new and reassembled.
The dispenser ring was loose due to the broken plastic dispenser. Replacement was too easy.Removed the old, and snapped the new one in place. Took all of 1 minute. Now I'm back up and running
Actually I had been out shopping , came home, and my husband suprised me by having it done.The ease and quickness that we esperienced in ordering and recieving the part was quite remarkable.We use all Sears appliances and they are all about 15 yrs old and still in very good service,Other than the despenser... we had no other operational problems.It was the personal online help that was the most surprising.. what a great thought. They found my part and part # so quickly.
I ordered the dispenser and it arrived within 24 hours. Amazing. It simply snaps onto the top of the agitator. Push the blue lock ring down to lock it in place and you are done. It works perfectly.1
Used a hand truck to lay washer on its side removed motor assembly and hoses,unplugged all wiring harness assembly. Using small hammer positioned new couplings on transmission and motor flush to end of shaft. Applied new insert on transmission coupling and positioned motor applied mount straps and screws. Reconnect wiring harness assemblies set upright and dry run cycle. Everything good washed 3 loads very happy no laundry mat visit.
I pushed up the blue ring on the old dispenser and then it pulled right off. I popped on the new one and pushed down the blue ring. Took me about 20 seconds. Voila! It worked! Cheapest and fastest repair you could imagine.
A snap! I slipped the dispenser on the agitator, pressed the aqua ring down and it was installed.
I ordered the part on Monday, received it the next day!! Popped the old one off put the new one on, no tools needed. Washed a load of laundry right away, worked great! Still does. I will definately order from PartSelect.com again.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.