Quick Question!

Have you ever purchased from PartSelect.com before?

11743324-1-S-Whirlpool-WP63-6766-Gas Conversion Kit - natural to liquid petroleum
11743324-1-S-Whirlpool-WP63-6766-Gas Conversion Kit - natural to liquid petroleum 11743324-2-S-Whirlpool-WP63-6766-Gas Conversion Kit - natural to liquid petroleum 11743324-3-S-Whirlpool-WP63-6766-Gas Conversion Kit - natural to liquid petroleum http://www.partselect.com/Schematics/Maytag/43484.gif

Gas Conversion Kit - natural to liquid petroleum

PartSelect Number PS11743324

This gas conversion kit converts a natural gas clothes dryer to a L.P clothes dryer. This kit contains a blocking plug, a burner orifice, a caution label, a rating label, and an instructions sheet.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$33.43

You Save

$5.57

Your Price

$27.86
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

9 of 12 people found this instruction helpful

Parts Used:
  • Gas Conversion Kit - natural to liquid petroleum
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: ROBERT from HOUSTON, TX

Mother-in-law's dryer quit heating. Her's was lpg, replacment was ng

First, I inserted a screwdriver between the front panel and the top and popped the top loose. Next, there is a screw close to the top of the front panel on each side. Remove these. Next I unplugged the light switch from the front panel and removed the panel. Next, unscrew the gas line from the burner assy. and remove the screw holding the burner assy. to the frame. CAREFULLY, remove the burner assy. taking care not to break the ceramic igniter. Remove the assembly and unscrew the brass screw on the right side of the burner. Replace the screw with the new assembly furnished with the conversion kit. Remove the tube that directs the gas to the ducting. Unscrew the orifice fitting and replace with the new fittings furnished with the kit. Reinstall the tube and CAREFULLY return the burner assembly to the dryer. Screw the assy to the frame and re-connect the gas line. Replace the front panel, 2 screws, and snap the top back down onto the front panel, taking care to align the two guide pins. Connect the gas line to the dryer and install the ducting. Plug it in and test for leaks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
  • Gas Conversion Kit - natural to liquid petroleum
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools:
Customer: Maria from Delaware, OH

I ordered part in anticipation of delivery of new dryer.

I asked a plumber to connect my new dryer. It came from the factory ready for natural gas and he needed the part to make it work with propane. My suggestion, ask a Whirlpool certified repairman. The plumber could not do the job and I had to ask a certified repairman out to do the job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2