Quick Question!

Have you ever purchased from PartSelect.com before?

11743242-1-S-Whirlpool-WP61005651-Temperature Control
11743242-1-S-Whirlpool-WP61005651-Temperature Control 11743242-2-S-Whirlpool-WP61005651-Temperature Control 11743242-3-S-Whirlpool-WP61005651-Temperature Control http://www.partselect.com/Schematics/Maytag/52001.gif

Temperature Control

PartSelect Number PS11743242

This part establishes and maintains the internal temperature of the refrigerator.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Fridge too warm.

Compare At

$94.74

You Save

$15.79

Your Price

$78.95
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

16 of 23 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: James from Scotts Valley, CA

Constant running, ice build-up in evaporator, fridge side warm

Simple parts replacement. The temp control was a bit tricky as it involved replicating the bends of the tiny tubing for the sensor coil, but everything is so modular that it was not that difficult.

Freezer defrosted while doing the control repairs, it had a lot of ice stuck in the evaporator because the defrost function was not working.

The worst part of all this was moving the food and making sure it did not spoil.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

82 of 634 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers, Socket set
Customer: Jimmy from Stratford, TX

The coils would freeze up and it wouldn't cool.

I removed the screws on the covers and remove them, then taken the screws from the timer, the temperature control just set in there, then pulled out a lttle ways and disconnected the wires and then removed. Installed the new ones. I taken the back panel off and removed the clip and pulled the defrost heater out a ways and removed the wires and removed the defrost heater. Installed the new defrost heater and clip and the covers.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2