Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743232
This drawer rail supports the right hand side of the deli pan.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I removed the shelf that supported the deli pan and unscrewed the screw that held the broken rail. After removing the broken rail, I inserted the flat tab of new rail into the provided slot on the front part of the shelf. Then I set in and tightened the screw that held the rail in place on the back of the shelf. I replaced the shelf and inserted the deli pan on the rails. The pan now easily slides in and out.The best part--I received the new part within two days of placing the order. Thank you.
Help other customers find the most helpful instructions.
Were these instructions helpful?
This is the second time I've replace this part and it is very simple. I removed the rear screw holding the broken element in place. I inserted the replacement rail, re-attached the screw using a nut-driver and it was done!
My husband did the repair in less than 5 minutes. Thank you
Took out the top shelf, turned it over and removed the broken rail with pliers(screw had a nut type top). Put the new rail in place, screwed it in and placed the shelf back in place. Less than 5 minutes!
Removed food items out of tray and on shelf. Removed shelf and unscrewed broken part. Then screwed on replacement, restored shelf and deli pan and restocked food items. Now. if I am brave, I'LL TRY TO REPAIR FREEZER DOOR so it closes properly. GRANDSON (5 YR OLD) just USED IT AS A SWING MECHANISM...NOW I HAVE TO LOOK FOR THIS REPAIR KIT ON THE WEB SITE !
Removed the shelf. Turned over & removed the broken rail & replaced with the new one. Very simple & wonderful service for the delivery of part came in two days !!! Thank You !!
Parts came faster than planned. Opened the box and perfect fit 5min. and I was done. Saved $80 service charge. Will use again !!
First I removed the screw nut holding the broken rail in place. After removing the rail, I lifted the top shelf to slide the new rail in place. I replaced the screw nut, then the drawer and it worked perfectly. Thanks!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.