Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743224
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I am going to be completely honest here. This problem had persisted for months. I finally decided that I would buy all the associated parts and repair the unit hoping to cover the problem. Much to my surprise, after carrying out the repair, using the instructions provided by PartSelect, I still had the problem. I decided to remove and LUBRICATE the button which depresses the Limit Switch when you push a glass against the rubber membrane. Low and behold the problem was solved. The frig is nine years old, so I feel I may have prevented other problems in the future by replacing the three parts. It was a follow the directions sort of repair. I was very pleased with PartSelect response to my order (received it next day) with standard shipping.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Simple to fix. Watched the video and noted what to do.Replaced the control board, solenoid, and limit switch. Woks like new!
after replacing control board, the water for ice maker still did not work. Took solenoid asy. out and the two cils for ice maker side were open. could not move wires to fountain solenoids because the fountain outlet to front was 3/8 inch and every thing else was 1/4 inch, so i had to order the solenoid assy. which is for coils. Theyhave also changed the tubing connections on the solenoids from compression screw on to inserttype once you push tubing in, there is no wayto remove it. reminds me of old electrical insertconnections which is a rip off.
unplug refrigerator. pull off bottom tray. remove 2 cover screws. lift and pull cover. remove remove switch bd. screws. remove remove ribbon cable , top right. remove connector top left. reassemble in reverse.
Extremely easy as I had alread taken the unit apart before except for the removal of the multipin connector from old board. Necessary to break the old board connector in order to get it off. Might be nice for you to supply simple replacement instructions with the more expensive parts.
Replaced the control board.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.