Quick Question!

Have you ever purchased from PartSelect.com before?

11743167-1-S-Whirlpool-WP61003407-Fountain Bracket - White
11743167-1-S-Whirlpool-WP61003407-Fountain Bracket - White 11743167-2-S-Whirlpool-WP61003407-Fountain Bracket - White http://www.partselect.com/Schematics/Maytag/53161.gif

Fountain Bracket - White

PartSelect Number PS11743167

This fountain bracket is nine inches long. It is all white in color and it is made entirely of plastic.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$33.86

You Save

$5.64

Your Price

$28.22
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 5 reviews What's this?
1-5 of 5
 

8 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Wing from Stockton, CA

Control board and fountain backet damaged by burned out solenoid.

Removed damaged fountain bracket by removing the torx screw using torx head screw driver. Install new control board and new solenoid onto the new fountain bracket using existing screws. Reinstall fountain bracket to the freezer door.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench set
Customer: Thomas from San Diego, CA

Ice chute door won't close tightly

First unplug AC power from the back of the refrigerator and I then removed entire fountain bracket assy that hold by 3 screws. Pull toward with some angle to able to access to a plug of wires and then disconnect it. Pull fountain assy downward. Set it on work place, remove all screws and transfer wires, switch, ice dispenser controller unit,solenoid, spring, flapper...and then install them to a new fountain bracket. Please note that this problem is 100% relating to mechanism. To test this work: Hold Fountain bracket assy vertically, press a flapper,position "open" and make sure return spring is working properly (enough pressure) . Now, install this unit back to my refrigerator. During installing screws, check flapper that can shut tightly enough and secure all screws, check a flapper again. I got it right for the third time because I was not aware of some parts alignment.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Donald from Aurora, CO

Ice and water despenser solonoid stuck in on position during the night and flooded my kitchen and basement

Un plugged refrigerator, removed 2 screws holding the front control cover in place. Removed 3 screws that held the despenser assey in place and removed the power cable. Inspected the burnt and melted assey and got on line with parts select and chose the parts I needed and ordered them. They had it all and shipped it that day. I was back in business in about 3 days. Thanks again. You have saved me on this appliance several times.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Fountain Bracket - White
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Gregg from Ingleside, IL

Melt down of part from over heating of selonoid from moisture getting into circuit board. I had to replace those also.

Take off cover plate. two screws. Take out three screws holding the bracket. Exchange the parts from old bracket to the new bracket. reinstall the bracket and cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: oliver from sebastopol, CA

Ice dispenser main board was fried

I replaced the broken and fried parts. And everything works great now

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5