Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743144
This right side meat pan is clear and is made entirely of plastic. It supports the right hand side of the sliding drawer.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
First I removed the shelf with rail components from the refrigerator, then removed the plastic rails from the shelf assembly. The new rails did not come with the nylon wheel and retaining screw assemblies, so they were removed from the old rails and installed in the new rails using an #2 phillips head screwdriver. I then snapped the new rails into the shelf assembly and re-installed the shelf into the fridge.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I slid the meat tray out of the broken rails and after cleaning it I used a flat head screw driver to pry gently the plastic rails slightly away from the metal tray to unlock the broken plastic rails and slid them forward to free them off the metal tray.Replacement was very easy sliding the new plastic rails back on the metal tray until they locked into place then screwed the plastic wheels on to the new rails and replaced the repaired tray back into place. Thank you Part Select for your service and help. Terry R. from Oklahoma City
This repair was quite simple. The rails basically slid off from the the drawer. I then had to screw on the rack wheel and replace the rails by guiding the notcc into the hole and slide it back. The whole process to replace both sides took only 10 minutes.
First I removed all food items from above and in the Meat drawer. Then I removed the meat drawer from the slides and placed it on the counter. Then I removed the shelf that the slide rails are attached to and turned it upside down on some folded towels. Next I inserted a screwdriver (Flat tip) between the bracket and the rail I am about to remove. This released the locking tabs. Then I slid the old rail back and it popped off. I install the new rails without the screwdriver inserting them in the slots and sliding them into place. Next I reinstalled the glass shelf back into the fridge. Finally I inserted the meat drawer back into the new slides. The Job went rather easy, just take your time and don't pry the screw driver too much, just enough to clear the locking tab.
I am not very good at fixing things. Googled for parts and your site came up. Easy to find necessary item via nice clear pix.I ordered part at 3:45pm on a Thursday over internet. Part arrived Saturday early afternoon. I do not know how you could get it here that fast.Was easy to replace and it was VERY inexpensive. Thanks so much
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.