Quick Question!

Have you ever purchased from PartSelect.com before?

11743137-1-S-Whirlpool-WP61002307-Rack Roller
11743137-1-S-Whirlpool-WP61002307-Rack Roller 11743137-2-S-Whirlpool-WP61002307-Rack Roller 11743137-3-S-Whirlpool-WP61002307-Rack Roller http://www.partselect.com/Schematics/Maytag/54096.gif

Rack Roller

PartSelect Number PS11743137

This rack roller is well under an inch in diameter. It is all white in color and it is made entirely of plastic.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$6.61

You Save

$1.10

Your Price

$5.51
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 5 reviews What's this?
1-5 of 5
 

8 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Jeffrey from Tiverton, RI

Broken left side slide rail for the meat/cheese bin

Removing the broken rail was very difficult. There is a small notch that actually holds it in place. To remove the old rail, there was a hole in the metal bracket next to where the notch was. You had to apply pressure through the hole to the rail to slightly bend it to get it to release the notch to slide the old rail out. After the old rail was removed, the new rail with rack wheel installed, slid in and snapped into place very easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ken from Nantucket, MA

Rack rollers on each guide had broken off.

1-Removed drawer; removed drawer shelve which contained rails; slid old rail out of shelve mounts with light taps on ends.
2- Screwed on the new rollers to rail guides; reinstalled new guides into shelve mounts; re-installed shelve onto mountings in refrigerator; re-inserted drawer nto new rails-Done!
Received parts 48 hrs. after placing order!
Great job! Third positive experience with Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Rob from Bolton, CT

Meat pan rails were cracked and broken.

This repair was quite simple. The rails basically slid off from the the drawer. I then had to screw on the rack wheel and replace the rails by guiding the notcc into the hole and slide it back. The whole process to replace both sides took only 10 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: dan from east lansing, MI

Drawer guides were broken. Drawer would fall out.

tricky part was removal of the old drawer rails. they have a little nub that sides in but does not slide out (the nub is a small triangle piece) so easily. needed to revmove the nub by use of a chisel (sharp knife would work). once that nub was gone the old rail slipped out and the new one slid right in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: George from Los Altos, CA

Renters overloaded meat drawer & broke drawer rails

Good news/Bad news story. One of your parts view showed the side rails without the drawer rollers another showed the rails with rollers. I ordered the rails expecting that they would come with the rollers attached. They did not so I had to place a second order for two rollers and two screws. As I live in CA, delivery was just a day for first order, but for second I ordered on Sat, delivery was on Tuesday. My complaint was double shipping and handling so total was almost $50.for two very simple items.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5