Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11743115
This lower door hinge bracket is all white in color. It is almost three inches long and is made of metal.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This was a very simpler repair to an annoying problem. First I removed the decorative cover on the top hinge pin of the door which was held on with one screw. I then removed the 3 screws of the top hinge pin with a socket, held the door in place with my hand and took off the top pin. Next, I simply lifted the refrigerator door off the bottom worn out hinge.removed the old door hinge bracket and bottom lower hinge pin that had worn, placed the new bottom hinge pin in the bracket. Finally, on the bottom of the refrigerator I replaced the natural door closer held on by one screw. Lifted the door back onto the new bottom hinge pin, held the door in place and installed the top hinge pin, put the cover back on and the refrigerator is closing like it was new again.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Supported door in the closed position to keep door from falling with wood 2X4s. After that it was easy to replace lower hinge.
Cleaned out the door. Loosened the top hinge. Lifted the door off hinge pins. Replaced lower hinge, hinge pin and closer. Put door back on. Tightened upper hinge back down on door. Done. Very easy and door is not that heavy.
1. mark location of removable baskets in door and remove baskets2. remove three screws in top hinge - save shim under hinge 3. lift door from lower hinge4. remove 3 screws from lower hinge bracket and remove bracket5. install lower hinge bracket with 3 mounting screws6. install lower hinge pin in bracket7. clean upper and lower hinge holes in door8. lubricate upper and lower hinge pins with grease9. place door over lower hinge pin - the magnetic seals will hold it in place10. install upper hinge bracket with 3 screws11. install baskets in doorNote: The plastic piece on the bottom of the door that mates with the hinge pin and provides a cam action should have been replaced at the same time.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.