Quick Question!

Have you ever purchased from PartSelect.com before?

11743097-1-S-Whirlpool-WP608732-Drawer Handle - Brown
11743097-1-S-Whirlpool-WP608732-Drawer Handle - Brown 11743097-2-S-Whirlpool-WP608732-Drawer Handle - Brown 11743097-3-S-Whirlpool-WP608732-Drawer Handle - Brown http://www.partselect.com/Schematics/Maytag/33879.gif

Drawer Handle - Brown

PartSelect Number PS11743097

This part is now brown instead of black.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$96.23

You Save

$16.04

Your Price

$80.19
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 6 reviews What's this?
1-6 of 6
 

6 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: wendy from Sandy, UT

Both parts needed replacing. Could not find a replacement until you.

Pulled out old screws. Replaced with new screws.
Very easy.
Cannot thank you enough. Sears said the parts were not made anymore. We were upset as rest of compactor was fine,but we had a torn guard and a cracked handle. Price of a new compactor was a fortune. But thanks to you. LEss than $50 good as new.
Someone needs to tell sears they are really missing out. You had a shelf we needed about 4 months ago and it was exactly what we needed,so we knew if anyone could help us it would be you. You were right on.
Thank you so much

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Drawer Handle - Brown
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Richard from Johnstown, PA

Broken plastic handle

Someone pulled a Conan on the compactor handle and broke it loose--no one admitted doing it but I have my suspicions. Since the compactor was installed during the first Bush administration, I assumed that the part would be unavailable. I tried to glue it with the latest "super" bond epoxy/space shuttle goop and it would not hold. A friend tried to plastic weld the crack--it worked until Conan showed up again and ripped it loose. I was ready to look for a new compactopr but since it had an insert that matched the custom cabinets--that I knew would not fit on a new unit--I looked on the internet for a part.
The part number was entered, the part was in stock and the order placed on Sunday afternoon. The part arrived on Tuesday and was installed in less than two minutes. It was the high point of the week.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Drawer Handle - Brown
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: William from Lucedale, MS

Handle had broken over the years. Needed a replacement

Removed 2 screws holding the old part on. put the new part in place, re-attached 2 screws. Good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Drawer Handle - Brown
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Thomas from Greene, RI

Broken handle

It is held on with three screws. The PartSelect was the only web site that showed me a picture of the part I wanted. The other web sites said it was no longer made. It was shipped out the day I ordered it, and took a minute to install it. Will order again from your company - great service - thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Handle - Brown
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Richard from Huntingdon Valley, PA

Handle had cracked

So impressed with this Company. Was about to buy new trash compactor, because we couldn't find a handle for an old Frigidair. Found website and on Friday ordered part (only $57...a new compactor would have cost $800). Part arrived ONE DAY LATER and was immediately easily installed by taking out old part which involved unscrewing it and installing the new one using the existing screws. THANK YOU.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Drawer Handle - Brown
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: VINCENT from GRANADA HILLS, CA

Handle broken

Simply slid handle into door compartment at top, and put in the 2 screws to hold it in place. Very easy to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-6 of 6