Quick Question!

Have you ever purchased from PartSelect.com before?

11743051-1-S-Whirlpool-WP6-917075-Discharge Pump Housing
11743051-1-S-Whirlpool-WP6-917075-Discharge Pump Housing 11743051-2-S-Whirlpool-WP6-917075-Discharge Pump Housing 11743051-3-S-Whirlpool-WP6-917075-Discharge Pump Housing http://www.partselect.com/Schematics/Maytag/53879.gif

Discharge Pump Housing

PartSelect Number PS11743051

This part is located under lower spray arm.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Not cleaning dishes properly.
  • Not draining.

Compare At

$99.14

You Save

$16.52

Your Price

$82.62
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 41 reviews What's this?
31-41 of 41
 

0 of 1 people found this instruction helpful

Parts Used:
  • Discharge Pump Housing
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Paul from Littleton, CO

Diswadher making a loud, low screeching type sound

I disassembled the bottom assembly to get to the discharge pump housing, removed it and saw that the disc was detached. I cleaned the assembly and all screens in the sink. The built up soap scum actually needed some scrubbing bubbles cleaner to loosen and soften, then came out with warm water and sprayer in the kitchen sink. I carefully reassembled, being mindful of over-tightening the screws in the plastic parts. Ran a cycle to wash out any remaining soap scum and chemicals and it runs like a champ.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Discharge Pump Housing
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Ed from Racine, WI

When the water was pumping out the pump made a rather loud noise

Took it apart, using the blown up view on your website and replaces the part. It only took about 20 minutes including cleaning the water discharge filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Discharge Pump Housing
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Wayne from Badin Lake, NC

Noisey

Took your percentage of parts and went to that part and found the bottom portion (plastic disc) had seperated from housing. Ordered and replaced. Works like new. Thank you for good pictures and info. WW

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Rick from Cedar Rapids, IA

Bottom of housing fell off of pump and rode on top of impeller

removed lower spray arm strainers and other parts to replace upper pump housing

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Discharge Pump Housing
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Hugh from Maspeth, NY

Dishwasher made a loud deep grinding noise

First of all, The part came in 2 Days which was amazing. I removed the jump up nozzle,lower washer arm and filter gaurd by unscrewing the cap (no tool needed).Then I removed the the Pump cover and secondary filter assembly by unscrewing the 6 screws with an allen wrench. I then removed the rinse arm then I unscrewed the discharge housing nut by hand. I then removed the three screws hold ing the discharge housing in place using a socket, replaced with new one and put it all back together the opposite of the way I took it apart. No more loud grinding sound. I hope this helps. It took about 15 minutes. I have a few extra pieces but the dishwasher dosn't seem to miss them. Just Kidding

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Discharge Pump Housing
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Gale from Green Bay, WI

Noisy did not wash dishes

Took out the old part and replaced it

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Discharge Pump Housing
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: nicholas from agawam, MA

Noisy

removed inside cmponents,removed washer discharge which was broken. replaced with new one purchased from parts select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set, Wrench (Adjustable)
Customer: Joseph from Oak Park, IL

Lower wash arm not turning, poor cleaning of dishes

Determined wash arm not turning. dismantled washer assembly to impeller. Found discharge assembly had broken causing a plastic plate inside of it to cut holes in the sides. Water was being forced out the sides instead of up into washer arms. Replaced discharge assembly and just in case, the impeller as well. Reinstalled impeller and discharge. Took out filter and cleaned it thoroughly. Reassembled washer arm assembly. dishwasher works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Wrench (Adjustable)
Customer: Andy from Port Deposit, MD

Started to make loud noise

this repair is done from the inside,remove lower basket,screw off the center nut (its not to tight came off by hand, no tools)take off spray arm,take all the torque bolts out,remove the screen filter take the 3 bolts out of the pump housing and remove, mine came apart that was the noise. The impeller may not need to be replaced but mine had marks on it so I did.Install new seals clean up parts and put it back together with new parts ..works as good as new!!! I had my new parts in 1 (ONE)day PartSelect thank you. Andy,

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set, Wrench set
Customer: louis from norfolk, MA

Grinding noise

replaced broken part

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Rodney from Hamburg, PA

Loud noise & water would not dscharge

removed racks disassembled lower unit as per diagram -reassabled

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31-41 of 41