Install videos!
11743008-1-M-Whirlpool-WP596669-Hose Clamp
Part Location Diagram of WP596669 Whirlpool Hose Clamp
See part 6 in the diagram
Replacing your Kenmore Washer Hose Clamp
11743008-1-S-Whirlpool-WP596669-Hose Clamp 360 view
( Grid squares measure 1x1 inch )
11743008-1-S-Whirlpool-WP596669-Hose Clamp 11743008-2-S-Whirlpool-WP596669-Hose Clamp 11743008-1-S-Whirlpool-WP596669-Hose Clamp 360 view
Part Location Diagram of WP596669 Whirlpool Hose Clamp Replacing your Kenmore Washer Hose Clamp
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Hose Clamp WP596669

 Fits your WC704!
★★★★★
★★★★★
1 Review

Rated by 17 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 7.76
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WC704!
PartSelect Number PS11743008
Manufacturer Part Number WP596669
Manufactured by Whirlpool
Product Description

Hose Clamp Specifications

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Washer Hose Clamp

Replacing your Kenmore Washer Hose Clamp
Back to Top
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Dishwasher, Refrigerator, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# WP596669 replaces these:
AP6009835, 01-37-687, 113200024, 113200152, 113200392, 14206537, 16314, 2-11639, 2-14739, 2-1575, 2-16169, 2-2515, 2-985, 200985, 201575, 202515, 21002253, 211639, 214739, 216169 , 22002509, 22003018, 22003072, 22003073, 22003905, 2200954, 22294, 23001257, 23001506, 25-6049, 25-7796, 25-7867, 251830, 25988, 272794, 272796, 272844, 272845, 272846, 272847, 274337, 27643, 287859, 288446, 301958, 34001161, 34001207, 34001208, 34001224, 34941, 353366, 353367, 356436, 357821, 36801, 370450, 370451, 370452, 371501, 371503, 371505, 371506, 388000, 39282, 3955674, 4-0059, 4-0168, 4-0179, 4-10296, 4-10377, 4-179, 400059, 400168, 400179, 40054901, 410296, 410377, 4171914, 478572, 487728, 488157, 489257, 563972, 568692, 569097, 596110, 596471, 596508, 596669, 6-911856, 6-919982, 6-920322, 601105, 616148, 644261, 648470, 660632, 660635, 67001408, 7-57247, 710082, 715453, 757247, 797369, 798017, 8055019, 8181537, 8181538, 8194172, 8318451, 8318490, 8318491, 8318492, 8318493, 8318494, 8318495, 8526324, 8526325, 8533946, 8541009, 866812, 866823, 9-0433, 9-0440, 9-11856, 900433, 900440, 911856, 9602-3, 965242, 965321, 9724996, 9724997, 98292, 983190, 98334, 98465, 98659, 99003634, 99003635, DC61-00219C, DC65-00008A, P113200024, P113200152, P113200392, R0601506, R0601540, R9800234, W10096851, W10096852, W10116736, W10117298, W10117299, W10156124, W10286346, W10286357, Y22003072, Y2200954, Y22294, Y757247 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stephen S - October 14, 2018
  Verified Purchase
part worked as expected
Part works great, hose doesn't leak, do not overtighten, not much room in my model of washer to tighten with a socket, but took my time and I am satisfied
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 17 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was leaking
Followed the instructional film that was included on website.
Other Parts Used:
Hose Clamp Water Inlet Hose
  • Julie from Bloomingburg, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was leaking from injector hose
Took old injector hose off, put new hose clamp on lower hose, was a little awkward tightening it, not much room, but took my time, really was not that hard to do, water sprays in tub much faster now, I have had washing machine 28 years, first major repair
Other Parts Used:
Hose Clamp Injector Hose with Air Gap
  • Stephen from NEW CUMBERLND, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set
2 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Leak as Washer Performs Its Functions
1. Remove the front panel of the washer by removing two screws at bottom of panel … 2. pull bottom of panel out, and remove. … 3. Remove two screws that secure the washer's top to the box (one on each side of the top; located in front. … 4. lift front edge of top and tilt it up and backward. … 5. you now have EASY access to the fill hose at the top of the tub. This is where the Rubber injector valve and Injector Sleeve are located (right on top). Replace these parts and re-assemble the washer by reversing process. I suggest that while you are in this deep, replace the factory compression-type hose clamps with stainless steel hose clamps. You can see this demonstrated on a YouTube video.
Read less
Other Parts Used:
Hose Clamp Rubber Injector Valve Injector Sleeve
  • David from SARASOTA, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking at top of tub when filling with water
Did repair as instructed by video, I'm 74 years old if I can do it anybody can!
Other Parts Used:
Hose Clamp Rubber Injector Valve Injector Sleeve Plastic Injector Nozzle
  • Frank from Patterson, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cold water flow was slow
Removed old part; exchanged rubber plungers between the hot and cold. Symptoms still the same - so eliminated the need for new rubber plungers (even though they still needed to be replaced). The only item left were the magnetic switches opening and closing the flows. The syphon was replaced due to broken plastic mountings causing the syphon to hang into the drum. Repair was a snap and finding the parts on your site was very easy and parts were there within 2 days at standard shipping. Thank you.
Read less
Other Parts Used:
Hose Clamp Water Inlet Syphon Water Inlet Valve with Mounting Bracket
  • Garry from Palm Bay, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
22 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from left side of washer during fill cycles
Remove two screws to take off the front. Remove two bolts to loosen the top, slide it aside. Remove one hose clamp and take out injector valve and nozzle. Lube the new nozzle with soapy water, slide the valve in and re-insert into hose. I replaced the hose clamp, but it wasn't really necessary.

Bolt down the top and replace the front and screws.

I did move the machine and clean the inlet screens, just to make sure. It did improve the hot water flow.
Read less
Other Parts Used:
Rubber Injector Valve Plastic Injector Nozzle Hose Clamp
  • John from Bethlehem, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water rear left side
This happened once before and had I remembered how to get the front door off and lift the top it would have taken me less time. I actually spent more time assessing prior to ordering parts than in repairing once the parts came.

One odd thing - it only leaked when the hot water was entering (if the settings were on cold only no leak - no idea why that should be).

Anyway, this injector and the rubber housing it slides into get old and clogged or deteriorate. I ordered all the parts and replace them - but probably only needed to replace the plastic injector nozzel and the rubber sleeve it fits into.

All good now - no more leaks (until the next time!)
Read less
Other Parts Used:
Injector Fill Hose Rubber Injector Valve Injector Sleeve Plastic Injector Nozzle Hose Clamp
  • Forrest from San Diego, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer not rotating
Washer not rotating, removed the control head and back cover. Then removed body housing around tube to get to the bottom. had to replace coupling on motor then removed the agitator tower and replaced the Parts for the tower agitator. unit is 16 years young and still looks and runs new, put a total of 55 dollars into repair and it should be good for a long time. This is with a family of five. Washing 2 loads everyday.
Read less
Other Parts Used:
Foot, Front - Single Direct Drive Motor Coupling Hose Clamp Water Inlet Syphon Agitator Repair Kit
  • kaine from butler, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench set
21 of 174 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water wouldn't stop
Unplugged washer then took back off control panel. Removed clamp and tube from pressure switch. Pushed in tabs with a screwdriver and lifted top. Removed clamp and broken tube. Put new tube in place and tighten clamp with nutdriver. Closed top and put other end of tube on pressure switch with clamp. Put back on control panel and plugged in. Clamps are to big for application but do work. So far so good!
Read less
Other Parts Used:
Pressure Switch Hose Hose Clamp
  • Steven from Westfield, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper and Lower Fill Injector snapped off and water was leaking out of the back of the machine
I looked at the machine diagram on the website and removed the screw on the bottom and lifted up the from panel which allowed me to have easier access to the fill injector. Then I removed the back panel off of the control panel on the top of the machine and removed the screw that held the fill injector in place, attached the new fill injector using the hose clamp I ordered with the part ( you need a new hose clamp because the other one is useless after you remove the old injector). Tightend up the screw to hold the injector in place and replaced the back panel and front panel. It was an easy repair and only cost $28.00 with shipping. I easily saved $150.
Read less
Other Parts Used:
Upper Fill Injector Lower Fill Injector Hose Clamp
  • Daryl from Newton, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cathie
February 19, 2020
Dishwasher has runs water in floor soon as I hook it up. And with the door open looking inside on the left side there's a hole where the water runs into the washer, well this don't stop running when the door is open. I had noticed water was all over the floor after about 10 minutes of being turned on, that's when i had noticed that with the door open it did not shut water off as before .. help
For model number MDC4809AWB0
PartSelect logo
Hello Cathie, Thank you for the question. We suggest testing the Water Valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. You can also test the Float Switch to see if it is closed. We hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Float Switch
$45.77

  In Stock
Water Inlet Valve
$61.52

  In Stock
Marcelo
April 8, 2022
New machine doesn’t turno water on and not working
For model number Wfw5620hw3
PartSelect logo
Hello Marcelo, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the door latch, the single water inlet valve, the dual water inlet valve, and the water level pressure switch. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Water-Level Pressure Switch
$82.86

  In Stock
VALVE
$106.91

  On Order
VALVE
$99.04

  In Stock
LATCH
$65.41

  In Stock
William
September 17, 2019
How does a clamp fix dishwasher filling with water after cycle is finished
For model number 66516462300
PartSelect logo
Hello William, thank you for your question. The Hose Clamp could be bent in such a way that it is preventing the water from travelling through the hose. I hope this helps!

Was this helpful?
Thank you for voting!
Frank
January 25, 2023
My front loading Amana door seal was replaced in November 2022, it still leaks.
For model number NFW7200 W
PartSelect logo
Hello Frank, thank you for contacting us. The issue is most probably related to a damaged wire diaphragm, part number PS11741554. It holds the door boot in place and helps in preventing leaks. If that is not the case, please check the hose clamp, part number PS11740613, and the door boot seal, part number PS11741579, for damage. Please reach out to customer service if you need help placing an order. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
Hose Clamp
$11.10

  In Stock
Wire Diaphragm
$22.07

  In Stock
Door Boot Seal
$277.48

  In Stock
  • 1
Back to Top
You May Also Need ?
Plastic Injector Nozzle
$10.35
$10.35
  In Stock
Injector Sleeve
$11.14
$11.14
  In Stock
Rubber Injector Valve
$21.32
$21.32
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743008
Manufacturer Part Number: WP596669
Brand
Model Number
Description
Kenmore
101906620
Range - Kenmore Range/Stove/Oven Model 101.906620 (101906620, 101 906620) Parts
Kenmore
106625480
Freezer
Kenmore
106625481
Freezer
Kenmore
106625482
Freezer
Kenmore
106625490
Freezer
Kenmore
106625491
Freezer
Kenmore
106626480
Freezer
Kenmore
106626490
Freezer
Kenmore
106627481
Freezer
Kenmore
106627483
Freezer
Kenmore
106627484
Freezer
Kenmore
106627491
Freezer
Kenmore
106627493
Freezer
Kenmore
106627494
Freezer
Kenmore
106628480
Freezer
Kenmore
106628481
Freezer
Kenmore
106628490
Freezer
Kenmore
106628491
Freezer
Kenmore
106628530
Freezer
Kenmore
106628531
Freezer
Kenmore
106629480
Freezer
Kenmore
106629490
Freezer
Kenmore
106629590
Freezer
Kenmore
106635170
Dehumidifier
Kenmore
106635171
Dehumidifier
Kenmore
106638170
Dehumidifier
Kenmore
106638200
Dehumidifier
Kenmore
106639200
Dehumidifier
Kenmore
106639201
Dehumidifier
Kenmore
106639202
Dehumidifier
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Hose Clamp
$ 7.76
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.