Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11742876
This part is no longer available in White.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
First I unplugged the range from the wall outlet and removed the eight screws from rear cover of the control panel. Then I simply pulled the two wires from the small transformer that is attached to the cover panel I had just removed. There is also a ground wire that is held in place by a sheet metal screw. From there it was easy to see the four screws that holds the electronic control pad in place. There are six wires that clip onto the circuit board using spade lugs. I drew simple diagram to be sure I attached the wires correctly after replacing the control pad.Next, I simply pulled the wires from the control circuit and removed the four screws. I aligned the new control pad and replaced the four screws. I attached the wires per my diagram. Then I positioned the cover panel and re-attached the ground wire as well as the two connections to the transformer.Finally, I positioned the rear cover panel and installed the eight screws. I plugged the range back into the outlet and everything worked fine. It took me about 35 to 40 minutes to complete the work.
Help other customers find the most helpful instructions.
Were these instructions helpful?
This was the first time I used Partselect.com and itwas perfect. The part came a couple days early in perfectly new condition. I moved the stove out from the wall and unplugged it. Then removed the six screws that held the covering, gaining access to the Clock/Control PaneI from the back. Disconnected the eight wires and then unscrewed the four screws holding the part in place. Installed the new part, reconnected the wires and reinstalled the back cover. It was seemless.
Customer service from Partselect.com was excellent Needed oven for Thanksgiving and part was overnighted by Fed Ex. Thanks to Steven of OH and Alexander from Campbell CA for instructions..we know we could do it ourselves. Thanks!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.