Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11742848
This inner door handle is half of a two piece door handle assembly. It is all white in color and it is made entirely of plastic.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
1. Open Door2. Use Putty Knife and and carefully separate outer door frame from inner door frame by sliding the putty knife all the way around the frame from the inside3. Remove the old broken handle. You should use a pointy nose pliers to take hold of the handle screws once you have then loose...4. Install new handle, Make sure it is seated flush in the door frame, then tighten with two screws (use the pointy nose pliers to get them started . .very tight space to work in)5. Snap on outer frame.6. Your done! Dave
Help other customers find the most helpful instructions.
Were these instructions helpful?
Found info on how to replace handle here. Couldn't have done it without that information! We popped out the black trim on the inside of the door and removed the spring to access the bottom screw. From there it was pretty much easy to see where ever thing fit. Had difficulty getting the tabs clipped in the front of the door.
I received the door handle in 2 pieces along with one screw to put the two together. 3 days later the 2 screws to attach the handle to the microwave door showed up so I could finally put the handle on. I was amazed that I had to purchase each piece separately and that they pieces were shipped in two deliveries.
Separated the inside panel on the microwave door, removed the screws from the old door handle and utilized them to install new door handle. Access to the screws was a little tight thus the "a bit difficult" rating.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.