Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11742811
This terminal block is used for the main power cord.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
This repair was so easy a sleeping Turtle could do it. You just remove the wiring from the old unit and remember which wire is on which terminal. Easily remove the old unit and replace it. Reattach the wires and you are done! Maytag is a very easy unit to work with. Just remember if you ever have to replace your Terminal Block, don't forget to order the brass nuts to attach the wires. Regular nuts will overheat and cause a fire hazard.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Killed the power, used socket set, installed new one.Needed wire cutters and stripper, to put new terminal ring. Reconnected everything. Took about 20 minutes.
Removed power cord and terminal block and replaced with new ones. Still could'nt find why dryer would not run. Founed I had not hooked up one of the power wires as it had turned up so it couldnt be seen. Hooked it up and dryer runs like new. Thanks for the quick shipment.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.