Quick Question!

Have you ever purchased from PartSelect.com before?

11742807-1-S-Whirlpool-WP53-0918-Lint Filter
11742807-1-S-Whirlpool-WP53-0918-Lint Filter 11742807-2-S-Whirlpool-WP53-0918-Lint Filter 11742807-3-S-Whirlpool-WP53-0918-Lint Filter http://www.partselect.com/Schematics/Maytag/35989.gif

Lint Filter

PartSelect Number PS11742807

Manufacturer Part Number WP53-0918
Manufactured by Whirlpool

This lint filter screen has two side guides on either either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Noisy.
  • Will Not Start.

Compare At

$16.78

You Save

$2.80

Your Price

$13.98
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 34 reviews What's this?
31-34 of 34
 

19 of 294 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Donald from Blauvelt, NY

Dry was heating intermittently at first and then stopped heating.

I first confirmed that the ingitor was working (because I could see it glow with the lights off at the bottom of dryer). I read within Parts Select that intermittent heating was likely the coils and that I could test their resistance to confirm that this was the problem. I removed the coils (very easy) and thenI checked their resistance with a tester. The resistance on one of them was reading 600 ohms instead of the required 1300 ohms. So I replaced them both and presto it works fine. I also took the opportunity to thoroughly clean out the lint (accessible with the front panel removed) and I replaced the lint filter which was ripped and the gasket around the door which was missing a piece. All very easy to do and parts select made it a cinch. For safety I made sure that the gas and electric were off before I did any of this work. oh, I also levelled the foot which made my wife happy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

19 of 637 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Julia from Randolph, NJ

Lint screen was cracked.

I threw out the cracked lint screen and put the new one in it's place. I don't know why I waited so long to order the replacement part.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

19 of 637 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: sarah from Cumming, GA

Tear in old filter

There was no reair needed. We just needed to replace the filter. The new filter arrived in a very short time and now we are drying clothes without losing lint through the dryer vent.
Ordering was easy with just the model and filter number which was listed on the dryer door. I was even given a diagram on the computer screen as to where to locate all the parts numbers needed.
This was a very satisfying order experience!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

41 of 1286 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Juan from Frisco, TX

Parts replacement

Changing the parts was easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31-34 of 34